Cardiozone Exercise & Fitness - Page 9 - Popular Questions, Answers, Tips & Manuals
Nordicktrack elliptical NTEL79820 - internal tablet does not see the pedals movement
- Ensure that your pedals and tablet are properly paired and connected to the same WiFi network.
- Make sure that your tablet's Bluetooth is turned on and that it is in range of the pedals.
- Check for any software updates for both the tablet and the pedals, and make sure that they are running the latest version.
- Try using a different cable to connect the pedals to the tablet, in case the current cable is damaged.
- If none of these suggestions work, you may want to contact the manufacturer of the pedals or tablet for further assistance.
1/16/2023 9:54:43 PM •
Exercise &...
•
31 views • 0 helpful votes
TR2 speed button not working
It sounds like there may be an issue with the motor or the belt that connects the motor to the treadmill. I recommend checking the belt for any signs of wear or damage, and if necessary, replacing it. If the belt is in good condition, then the motor may need to be serviced or replaced.
1/15/2023 8:55:20 PM •
Exercise &...
•
29 views • 0 helpful votes
How do I reboot my technogym want run
Hi,
usually you have a power button on the machine that you can press once to shutdown and once again to power up. It looks like a circle with a vertical line intersecting the top. So you can press that twice with a 15 second pause in-between presses.
Thank you.
11/16/2022 9:50:11 PM •
Exercise &...
•
111 views • 0 helpful votes
I m facing an issue to repair on technogym console
I'd be happy to help you with your software issue on your Technogym Unity3 EJ. Here are some general steps you can take to try to fix the issue:
- Restart the equipment: Start by powering off the Technogym Unity3 EJ and then turning it back on again. This simple step often resolves many software issues.
- Check for updates: Check if there are any available software updates for your Technogym Unity3 EJ. This can be done by checking the manufacturer's website or contacting their customer support.
- Check for connectivity: Ensure that the equipment is properly connected to the internet or network. This is important for software updates and other features that require an internet connection.
- Factory reset: If the issue persists, you may want to try performing a factory reset. This will erase all the data and settings on the equipment and restore it to its original state. Be sure to back up any important data before proceeding with a factory reset.
- Contact customer support: If none of the above steps work, it's best to contact Technogym customer support. They will be able to provide more detailed and specific guidance for your particular issue and equipment.
I hope these steps help you to resolve the software issue on your Technogym Unity3 EJ.
if u like to tip :
https://paypal.me/AymanZiyat and ty
11/14/2022 12:10:03 PM •
Exercise &...
•
118 views • 0 helpful votes
What is error code 53? Treadmill only working when incline is 0.5. When change up or down, it shuts down.
Error code 53 typically indicates a problem with the incline motor or the incline sensor on a treadmill. It could be caused by a malfunctioning incline motor or a problem with the wiring or connections between the motor and the sensor. The fact that the treadmill only works when the incline is set to 0.5 suggests that there is an issue with the incline mechanism and it may need to be serviced or repaired by a professional.
11/24/2022 9:40:15 PM •
Exercise &...
•
84 views • 0 helpful votes
Keys 8800 Treadmill Won't Incline
If your Keys 8800 treadmill is not inclining even though the incline motor is running, it is possible that the worm drive shaft has become damaged or has become disconnected from the motor. This is a mechanical issue that will need to be addressed by a trained technician. I recommend contacting Keys Fitness or a qualified treadmill repair service to have the problem diagnosed and repaired. It is important to have this issue resolved, as using a treadmill with a damaged or malfunctioning incline mechanism can be dangerous.
12/10/2022 4:39:50 PM •
Exercise &...
•
48 views • 0 helpful votes
My Trojan Runx treadmill on start up is slow to get to speed and when i climb on while at speed you can hear it losing speed.
There could be a few possible reasons for your Trojan Runx treadmill to have this issue:
- Belt tension: The treadmill belt may not be tight enough, causing it to slip and lose speed. You can adjust the belt tension by using an Allen wrench to tighten the bolts at the back of the treadmill.
- Motor: The motor may be overheating and shutting off, causing the treadmill to slow down. You can check the motor by opening up the motor cover and looking for any signs of burning or overheating.
- Motor brushes: The motor brushes may be worn out and need replacing. This can cause the motor to run slower and eventually shut off.
- Power supply: The power supply to the treadmill may be insufficient, causing it to lose speed. Make sure the treadmill is plugged into a dedicated circuit and not sharing power with other appliances.
If you're unsure about how to diagnose or fix any of these issues, it's recommended to contact a qualified technician or the manufacturer for assistance.
10/31/2022 9:30:12 AM •
Exercise &...
•
92 views • 0 helpful votes
Switch puts lights on but treadmill doesnt go on
Hi,
please restart your treadmill without standing on it to see fi the belt moves. If so, please decrease the incline of your treadmill and attempt to ride again. Please check for any debris under the belt (after stopping it) to make sure nothing is impeding it's movement.
Thank you.
11/1/2022 4:42:54 PM •
Exercise &...
•
85 views • 0 helpful votes
What does error 11 mean and how to fix error 11
Hi,
it could be that there is too much friction between the belt and the portion of the machine below it. Try squirting some oil below the belt and let it run for a little bit before hopping on the treadmill again. Otherwise, you might need to have the treadmill serviced through it's manufacturer.
Thank you.
12/3/2022 2:18:36 AM •
Exercise &...
•
39 views • 1 helpful votes
Discovery 415 error 11 will run for 11 seconds only
Error 11 on the Discovery 415 treadmill indicates an issue with the speed sensor. This sensor is responsible for detecting the speed of the belt and communicating it to the machine's computer. When the sensor fails or becomes dirty, the machine may shut down or display an error message.
To troubleshoot this issue, first, ensure that the machine is properly plugged in and that the safety key is securely in place. If these components are functioning correctly, check the sensor for any signs of damage or debris. Clean the sensor with a dry cloth, and check the wiring to ensure that it is properly connected.
If cleaning the sensor and checking the wiring does not resolve the issue, you may need to replace the speed sensor. Contact the manufacturer or a qualified repair technician for assistance with replacing the sensor.
12/3/2022 2:23:59 AM •
Exercise &...
•
34 views • 0 helpful votes
Not finding what you are looking for?