Casio Pathfinder - Answered Questions & Fixed Issues
FLASHING RECOVER
Hello!I replaced the battery on SPF-60D. I reset the AC but now my pressure sensor is not working. It shows dashes ------ and when I go to the calibration settings it is OFF and I can't change the value. The temperature work OK. I'm asking for help!
9/1/2021 5:08:40 PM •
Casio Sea...
•
Answered
on Sep 01, 2021
•
396 views
Hello sir
i have a
I suspect there is water leaking in to the sensor unit circuit located just behind the sensor. The Casio service would change the sensor, and all the gaskets in the watch. Then do a water pressure test on the case and etc. to make sure no leaks. I do not think you can service this yourself. You would have to know exactly the parts to buy and have the tools, and the pressure chamber to verify the gasket seal performance.
You should send it to Casio with a copy of your complaint. Look up Casio on the Internet and choose your country. Go to support to find the service address and instructions of where to send the watch. If you email them it can take a few days till they respond. They will send you the specific instructions. Their service is terrific. I own a number of their high end watches. In fact I have one with them being serviced. Sometimes I have broken the glass because I am rough with my watches at times.
2/11/2018 7:26:39 PM •
Casio Sea...
•
Answered
on Feb 11, 2018
•
308 views
Why isn't battery recharging in sunlight?
I own the a same CASIO PRG-240 watch.I think there is no problem.Charging every solar powered watch under direct sunlight has to be made in a well lighted and ventilated area, such as balcony and never behind a window glass.Charging from LOW to FULL is a long way (see instructions).Now showing FULL and when removed after a while, MEDIUM, is normal as the battery is not really fully charged.If you use an incandescent light,place the watch at least 50-60 cm distance from it.Usually there are no great results with the incandescent light.I never use this option.
Wear your watch for a couple of days (a week for example) under sunlight as much as possible and check.If it still shows MEDIUM after a time period, may be a battery replacement will solve the problem.
10/29/2018 11:48:44 AM •
Casio Mens...
•
Answered
on Oct 29, 2018
•
631 views
Ia am looking to bay
mcdevito75 here, Ebay is your best bet. They have a large selection of wrist bands for all watches. Or, you can visit a small watch repair shop in your area for a new band.
3/30/2015 11:38:34 AM •
Casio Sea...
•
Answered
on Mar 30, 2015
•
232 views
How to reset 2872 casio ?
If a Casio watch has a display readout that says "OPEN", the watch isn't closed properly. Check if all the parts are inside the watch and make sure the watch is tightly screwed shut. If the watch was serviced at a repair center you should return it to have it checked (for missing parts).
Casio pathfinder battery operated watch keeps blanking out display?
Your watch is solar powered, so I think it isn't charged lately. At a low charge, the watch goes into saving mode by switching off the display (while keeping the time, date, etc.). To charge the watch leave it in a brightly lit spot for a day or two. That should be enough to make the watch function as normal again.
For more information, you can download the manual of your watch here (direct download link):
Timepieces Watches Manuals CASIO
Need new battery. How do I do that?
Around the outer edge of the watch there will be an indention. Pry open with a small screwdriver. Your internal compartment should be right there.
12/25/2014 5:21:45 PM •
Casio...
•
Answered
on Dec 25, 2014
•
854 views
How do you change battery on casio 1346 module watch, I notice in back of watch there are six slot.
Harbor Freight sells a low cost watch wrench but in a Robinson Crusoe situation you can CAREFULLY use square nosed needle nose pliers(Lowes or The Home Depot won't object if you try out one of theirs); hold watch in wash cloth to protect your hand, put the square blades in the watch back indentations and slowly turn with maximum pressure, after it opens use a quality Japan Maxell SR621W silver oxide, do NOT use a China alkaline version as they leak and have less run time. Use a Q-Tip with light Vaseline around the sealing edges when reassembling. Sincerely batteryBob
11/19/2014 4:04:58 PM •
Casio...
•
Answered
on Nov 19, 2014
•
703 views
Not finding what you are looking for?