Coleman Electrical Supplies - Recent Questions, Troubleshooting & Support


If you plan to have a new diesel generator set, please reference the website: www.dieselgeneratortech.com

Coleman... | Answered on Dec 05, 2019


diesel generator set, please visit at www.dieselgeneratortech.com

Coleman... | Answered on Dec 03, 2019


It should be behind end bell housing (opposite engine).

See https://www.jackssmallengines.com/jacks-parts-lookup/manufacturer/powermate/generator/pm/pm0535202.02/generator-parts

I find no available stock. PowerMate does not list the .01 model and the .02 model shows parts as NA.

Check residual magnetism, brushes, diodes and capacitor.

Coleman... | Answered on Nov 17, 2019


http://www.powermate.com/pdfs/2014/07/30/[Untitled].pdf
(see page 22)

Coleman... | Answered on Nov 03, 2019


Please contact your supplier or see it in maintenance manual.
In future, if you need to buy diesel generator set, please visit at www.dieselgeneratortech.com

Coleman... | Answered on Oct 30, 2019


Please contact your supplier, they will tell you.
But if you consider diesel generator set, maby you can visit : www.dieselgeneratortech.com

Coleman... | Answered on Oct 30, 2019


Here are a couple of repair videos via YouTube. Your posting is not specific enough for a more targeted response.

https://www.youtube.com/watch?v=CXAJ-Y7I05M

https://www.youtube.com/watch?v=44_uf-bo3VI

https://www.youtube.com/watch?v=srGwfiS0Fb4


Coleman... | Answered on Oct 26, 2019


Your question is good, maybe you can find answer from your friend.
Diesel generator set website: www.dieselgeneratortech.com

Coleman... | Answered on Oct 15, 2019


How is the quality?
The resale value depends on the situation of your generator.
If you need to have a diesel generator set, please visit website: www.dieselgeneratortech.com

Coleman... | Answered on Oct 12, 2019


The website has the answer you find: www.dieselgeneratortech.com, see on "support".

Coleman... | Answered on Oct 10, 2019


FIND OUT WHO MADE THE ENGINE AND GO THAT WAY. PROBABLY A BRIGGS AND STRATTON.

Coleman... | Answered on Sep 29, 2019


Diesel generator set website: www.dieselgeneratortech.com

Coleman... | Answered on Sep 24, 2019


You can buy Generator Wheel Kits and Spares on our site.
https://www.generatorguru.com/wheels-and-wheel-kits/

Kind regards
The Generator Guru Team
blankgen1280-yvhi3wxpq4zyabcrzo2wizws-1-0.jpg

Coleman... | Answered on Sep 20, 2019


My answer:

Believe it or not HFT (Harbor Freight Tools), which has local outlet stores in most big cities and is online as well (not sure where you are located), has a ton of various mountable tire/wheel assys in stock.

Some are swivel plate mounted - some are fixed plate type - and some wheels are just stand alone for axle-thru type mounted shafts of various diameters.

They even have a 13HP Genset wheel kit p/n 94192 for $24.99 online, and possibly the same price in-store if they indeed do stock it in-store. You just have to call a local HFT store and find out.

Prices can't be beat, and even though most everything there is made in China they do have some pretty good stuff there.

There is one other alternative if they don't have it in-store, and you really want to save a few bucks.

You yourself can make the same wheel kit set-up for under $15 if you are handy with metal working, and have a metal supply house near you.

If your Genset frame already has the axle hole plates welded onto the frame like I believe they all do today - then just buy the steel axle rod in whatever diameter rod is needed, and whatever length you need to clear the frame plus the added 2 wheels with 2 washers and 2 clearance bushings, and then just drill 2 cotter pin centered holes (1 on each end of the axle), and it's a done deal - all except for attaching any old metal type handle assy from maybe some old discarded gardening implement or possibly an older metal handled snow shovel for example. Just cut it down to size, bend according to fit the frame and bolt it on with 2 sturdy nut/bolt & lock washer assys. Done deal!!!

Just buy the 2 wheels anywhere that sells them cheaply, or else hunt some used ones down at a garage sale or thrift store maybe.

I made my own wheel kit setup on my own personal 5500W 10HP Generac Genset, and used the HFT pneumatic 10" tires when they were on sale for 1/2 price at $3 each. Axle rod - cotter pins (2) - washers (6) - axle spacer bushings (2) - custom hand made recycled handle & misc nut/bolt hardware all cost me under $10.

Labor cost - PRICELESS!

Please post me a reply as to finding this solution being the best resolve to your wheel kit problem there by following my recommendations above. Also please rate my troubleshooting fix as well.

Keep me posted and I'll follow up as well.

Best regards,

Frank

Coleman... | Answered on Sep 20, 2019


Google (coleman)(14.50)(manual) without parens OR request the manual from Coleman.

Coleman... | Answered on Sep 08, 2019


Bad capacitor. They cost 13 bucks. Call 800-445-1805 to buy one.

Coleman... | Answered on Sep 02, 2019


in the end of the fuel line in the tank
a small brass filter in the fitting

Coleman... | Answered on Sep 02, 2019

Not finding what you are looking for?
Coleman Logo

1,494 questions posted

Ask a Question

Usually answered in minutes!

Top Coleman Electrical Supplies Experts

John Trevino

Level 3 Expert

1420 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Shawn DuRee

Level 3 Expert

356 Answers

Are you a Coleman Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...