Daewoo Washing Machines - Page 4 - Answered Questions & Fixed Issues
I have daewoo top load washing machine model DWF 200PS 10KG
Hassan... sorry to hear of your troubles,
There are definite procedures for wet equipment handling!
Immediately remove ALL POWER.
(THE MORE IMMEDIATE the better the results).
Open the equipment to the fullest extent possible... remove excess water.. and use compressed air to help move excessive moisture away.
WD40 (water displacement) is an excellent product for this purpose. If the water was clean... allow the unit to air-dry
TOTALLY before even thinking about restoring power.
If dirty, muddy or corrosive... rinse the unit with fresh clean water...
THEN proceed with the water removal...
After several DAYS... carefully look into & around electrical connections for any signs of corrosion or electrolysis...
Make an inventory of part to refurbish or replace.
Many connectors can be cleaned with Isopropyl Alcohol & conditioned with an anti-corrosive (no-ox compound, white lithium or even petroleum jelly) re-connected, refitted & re-used...
Other parts.... NOT-SO-MUCH...
Everything must be completely ABSOLUTELY dry & re-assembled before attempting to restore power.
Hope this helps...
Yes entire telephone exchanges have been in mud slides, hosed off... properly dried & restored to service (honest... SxS CDO).
What is Error HI?
Hi,
you didn't mention the model, but on the washer/dryer combo units, the H1 means the following:
Dryer temperature sensor error detected A fault has been detected with the dryer temperature sensor on washer dryer models.
- Check connections to dryer sensor
- Check temperature sensor
IE error code
Water inlet error - washing machine failed to fill
The fault code is displayed, if the washing machine does not detect any incoming water.
·Check wiring to water inlet valve
·Check water valve
·Check drain pump
·Check pressure switch
Check PCB
12/21/2015 7:59:50 AM •
Daewoo...
•
Answered
on Dec 21, 2015
•
292 views
What is meant by L E?
Washing machine door opening error
The washing machine or washer dryer door has been detected as open or unlocked.
·Close the door!
·Check the door lock switch
·Check the door latch
·Check PCB
Not finding what you are looking for?