Dell Office Equipment & Supplies - Answered Questions & Fixed Issues
There is an error message on my printer that says
Use Service Center to solve printer problems
The Service Center provides step-by-step troubleshooting help and contains links to printer maintenance tasks and
customer support.
To open the Service Center, use one of these methods:
Method 1
If it appears on an error message dialog, click the For
additional assistance, use the Service Center link.
Method 2
1 Click or Start.
2 Click All Programs or Programs, and then select the
printer program folder from the list.
3 Select Printer Home.
4 From the Support tab, select Service Center.
12/31/2022 8:07:26 AM •
Dell V313w...
•
Answered
on Dec 31, 2022
•
253 views
I CHANGED TONER BUT RED LIGHT HAS NOT CHANGED TO
Look for a fuse on the catridge. If there is NO fuse or it was broken before you insert the cartridge, the toner EDN detection will be NOT cleared. By yourself fuses and change them when your printer starts to blink.
If that didnt help, there can be lots of problems. When you power on the printer you have to hear a nois of rotating parts...if no look for piece ot paper or other problem in internal paper path. Maybe you have a burned termofuse in fuser section.
pifonski
Replace the fuse in Dell 1110 toner cartridge
I've found that the Dell 1110 printer has a special feature for resetting the toner alarm. If you refill the toner cartridge one way or the other, or buy a new, you have to let the printer "blow" the small 5 x 20 mm fuse that sits in a plastic holder on the cartridge.
It you try with an empty fuse holder the printer will work, at least for a while, but the alarm will stay on.
The right thing to do is to insert a 63 mA fast acting (F) fuse in the holder on the cartridge, insert the cartridge and start the printer. During the start up-sequence the printer will blow the fuse and note that as a "proof of new toner". You'll see the alarm go off and the status sheet will indicate 100% toner! Also an 100 mA F fuse may do the trick, but probably not a higher amperage. See the last minute of https://www.youtube.com/watch?v=9Ox_kqCYlSU
Dell1110 Laser Printer.
Changed Cartridge -
Hello,
If you have flashing RED and GREEN LEDs on your Dell 1110 your printer will need servicing by the Dell service department. It is hard to say what is wrong without looking at the printer in person but those two lights together spell trouble not easily fixed. It could be a damaged circuit board or component. This typically has nothing to do with ink, paper jams, etc.
Regards,
Chris
Error on Xerox C525A ( 004-332 )
Dear Sir,
can you help me out. i've got a Xerox C525A with a error
message "010-397". what does this mean? and how can i
fix this so i can carry on printing.
9/25/2022 10:24:33 AM •
Dell 3100cn...
•
Answered
on Sep 25, 2022
•
1,600 views
Poor copy quality
there are 3 reason if the copy gray & less sharp:
1) the toner you are using is not compatible very well with the cartridge unit if you changed other compatible toner.
2) the cartridge going near the life-cycle, (also cause print blurred)
3) the photo drum going near the life-cycle
you may try to change the quality toner (original factory). or
change the cartridge if it is out of the life-cycle
9/9/2022 5:12:40 PM •
Dell 1600n...
•
Answered
on Sep 09, 2022
•
255 views
MI PROYECTOR EMPIEZA A ENCENDER Y SE APAGA.
buenas noches. tengo un problema con mi proyector.. hace unos minutos encendio y se veia la imagen pero luego lo desconectaron y cuando volvi a encender solo prende la luz de power pero no sale la imagen quen podra ser???
1/9/2022 3:41:42 AM •
Dell 2200MP...
•
Answered
on Jan 09, 2022
•
13,227 views
Is a Dell V313 Printer WiFi capable?
all printers made , modern this is and was an option new
313 was an option, 2009 old printer it is,
the manual tells how to use that, here if it is present.
did you used USB before not told. and if yes or the seller did
used and you bought printer the printer must be reset;.
page 21
https://www.manualslib.com/manual/227801/Dell-V313.html?page=21&term=reset&selected=1#manual
or is this a pre buy question, if yes ask them.
can can not ESP THEM NOR PRINTER OPTIONS EVER.
non deities we are
page 55 is wireless setups.
The printer supports three wireless security options: no security, WEP, and WPA/WPA2
wpa2 is the best, others are super un-secure.
page 88
wifi trouble shooting is there.
if printer is used, (bought) page 89 must be reset
12/31/2021 5:01:11 PM •
Dell Office...
•
Answered
on Dec 31, 2021
•
38 views
Not finding what you are looking for?