Dewalt Drills - Recent Questions, Troubleshooting & Support


This is indicating the battery is too hot to charge, usually after coming off the tool right after some hard work. During the charging process the battey heats up so if you charge a hot battery, thereby making it hotter, you shorten the lifespan of the battery considerably. If you are getting a hot/cold pack delay indication on the charger, it should automatically start charging once the battery has cooled down sufficently.

Dewalt DC920KA... | Answered 3 days ago


Hi,
Simply Google "how to replace 18v dewalt drill brushes"

You will get three youtube videos on how to do it right at the top of the page...

heatman101

Dewalt ; 18v... | Answered on Nov 21, 2019


You can try warranty services. However, if they are having an event in your area you might just try going down there. I have taken bad batteries to them in the past and they just GAVE me a new one.
http://dewalt.com/events.aspx

Dewalt Drills | Answered on Oct 31, 2019


OPEN CHUCK FULLY AND LOOK INSIDE , THERE IS A SC REW YOU NEED TO REMOVE USUALLY A LEFT HAND THREADED ONE

Dewalt Drills | Answered on Sep 06, 2019


What kind of batteries are they? If they are NiMh and haven't been used for a while, they can lose their charge and NOT be sble to be charged again!

Do you have a 3rd battery that does work? Buy a battery to make sure the charger is working or that the drill is working. If yes to both of these, then your old batteries are NFG.

Dewalt Drills | Answered on Aug 18, 2019


As far as a schematic goes, I would guess that it is proprietary in nature and that not even dewalt "repairs" them. I wouldn't be at all surprised if the same model had several different versions of circuit boards representing different production runs

Dewalt Drills | Answered on Jul 01, 2019


  • Defective battery
  • Defective charger

Dewalt Drills | Answered on Jun 27, 2019


Hold the chuck by its sleeve, put the drill in reverse (make sure it's set at high torque if you used it in a drill/driver) and go full speed. That should release the bit.

Dewalt DW0521... | Answered on Jun 09, 2019


Check battery. put a new in and works?

Dewalt Drills | Answered on May 31, 2019


I'm assuming you have a DCD970 as DeWalt doesn't have a DC970 and the DW970 is an impact driver. The chuck on your drill is a new design that doesn't have a lock screw inside the chuck, they are put on very tight with lock-tite to hold them on. They are made to be taken off with a special chuck holder and vice jig that only service centers have. The allen wrench method used on older chucks won't work as the chuck will just loosen when you hit the allen wrench. I have on occasion removed one by doing the following: Turn the chuck fully open then secure it in a vice with the drill straight up. Holding the drill body and using the handle for leverage, turn the drill counterclockwise, as you are looking down on it, with steady, strong pressure. If the chuck breaks free it will spin off easily. If you are at all afraid you may break the handle you may have to take or send it to a service center to have it removed.

Dewalt Drills | Answered on May 14, 2019


manufacturer -- online search --or local tool repair shop

Dewalt Drills | Answered on May 02, 2019

Not finding what you are looking for?
Dewalt Logo

1,597 questions posted

Ask a Question

Usually answered in minutes!

Top Dewalt Drills Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Lance Guthrie
Lance Guthrie

Level 1 Expert

18 Answers

Spud Howell

Level 2 Expert

66 Answers

Are you a Dewalt Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...