Dual Cell Phones - Page 5 - Recent Questions, Troubleshooting & Support

First of all, you need to provide the details of your Mobile Phone, Model number, Country and Network you are currently using now. To get the unlock code for your mobile, visit Superunlockcodes.com and unlock it easily.

fds

Hi!
here you will find out your theme
www.mobile9.com

good luck

My Dear Your Phone Keypad IC Default So Please change Keypad IC And Keypad Problem will Solved

Click SETTINGS
Click Dual SIM Settings
Take your pick of DUAL SIM OPEN, ONLY SIM1 OPEN, or ONLY SIM2 OPEN

Hope it works...

Dear Brother:ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will SolvedIf For puk & pin cod problem So PleaseVery Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office opratorEnter The Puk code and YesEnter The pin code and YesSo Puk code Open and Problem will Quickly Solved

try this1122

try 0000 or 00000.it may be the default code for most phones

This must be followed exactly. As far as the Java I have plenty of Java games available on the CD I offer. See very bottom.
ATT Manual Set Up

WAP

***First Step***
1.Main menu --> Select Services
3.Select Data Account --> Select GPRS
5.Select the first entry
6.Edit the account name to whatever you would like
7.Edit APN to wap.cingular (lowercase)
8.Edit Username to [email protected] (UPPERCASE)
9.Edit Password to CINGULAR1 (UPPERCASE)
10.Edit Auth Type. to Secure
11. Save

Select Back --> Select Back

***Second Step***

Select WAP
1.Select Settings --> Edit Profile
3.Select the first entry --> Edit Profile
5.edit the name to whatever you would like
6.Edit Homepage to http://device.home
7.Edit Data Account to the Name you established in the First Step
8.Edit Connection type to HTTP
9.The IP address is 066.209.011.032 and the port number is 8080
10.Edit Username to [email protected]
11.Edit Password to CINGULAR1
Select back or done
Select Activate Account


You should now see a Black [G] in the upper left of your screen.

MMS

Select Messages --> MMS --> Message Settings
Select Server Profile
Select the first entry
Select Edit Profile
Edit Rename Profile to whatever name you would like
Edit Home Page to http://mmsc.cingular.com
Edit Data Account to the same data account you created for WAP
Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
Edit the Username to [email protected] (UPPERCASE)
Edit the Password to CINGULAR1 (UPPERCASE)

Select Done or Save
Make sure to activate the profile and you are good.
For full help topics I have a cd available for 10 us dollars. Has 100's of mp3 ring tones wallpapers, and java games and opera java browser. Guaranteed help on every question ever asked on these phones. And all settings for all cellular services. I have answered 100 questions with this CD. If interested contact [email protected] Pay Pal only, will send out First CLASS Mail in padded envelope. If interested I will send Pay-Pal invoice that can be filled out and returned with instructions. Guaranteed safe transaction.

Guys I had the same problem with the k599 Sciphone and none of the solutions found on the internet helped me. New chinese models tend to restart after testing is over and this results in turning the wifi application on. So I spent many hours on thinking how to bypass this function and this morning I woke up with an idea that really worked!! The steps are quite similar with the ones followed to debug older models:

put 2 chips on cell
Disable WLAN.
1-enter in factory mode *#3646633#
2-go to RF Test Tool
3-choose GSM, confirm OK!
4-go to Power scan
5-Select Band DCS1800 click OK
6-the cell frozen
7-wait for 3 minutes testing
8-while testing connect to a pc using the USB cable (do NOT select ANY of the options appearing on the cell screen)
9-Click the CENTER button of the cell until you go back to principal menu
10-go to settings/network settings and choose GSM Preferred or any other option (except WLAN only!!)

In this way the cell does not reboot, and the wifi application stays off, so the option can now be changed...

Hope this helps!

Greetings from Greece!

email me to [email protected] if any questions

I have the same Problem me and my sister both bought one about 2 months ago and now they wont charge :( such a waste of money and both batteries wont charge. Because they are from hong kong i dont know what to do ??

Hi Ronald,

You would have to contact your service provide and request them to send you the gprs or internet settings. Once you get the settings pls try and shut down your mobile for a while and then switch it on again..

If problem persist pls try an speak to the customer care exe.

Hope this should work.

Pls give me rating based on the suggestion.

Regards,

Richee

hi adeola, you need a .jar file. go to www.getjar.com choose your device (there's no n99i-unless some chinese clone). you can check your device id on the white sticker under battery.

rate me if helped,thanx.

Please Go To Phone Book and G To Delete Contact and Click option All Read

Data Account Setup:
From the Main Menu select > Services > Data Account > GPRS
Scroll to an empty account (IE: Account and select Edit
Set Account Name to T-Mobile Internet
Set APN to internet2.voicestream.com
Leave Username and Password blank
Press Done
Select Yes to Save
WAP Profile Setup:
From the Main Menu select > Services > WAP > Settings
Select Edit Profile
Scroll to an empty profile (IE: Profile and select Edit Profile
Set Profile Name to T-Mobile Internet
Set Homepage to http://www.t-mobile.com
Select Data Account > GPRS > T-Mobile Internet
Set Connection Type to HTTP
Leave Proxy blank
Leave Port blank
Leave Username and Password blank
Press Done
When Prompted to Save select Yes
Scroll to T-Mobile Internet and select Activate Profile
To Access the Browser:
From the Main Menu select > Services > WAP
Select Homepage to bring up the homepage
Select Enter Address to browse other pages
To setup Picture Message (MMS)
Create Data Account
Select Menu
Select Services
Select Data Account
Select GPRS
Choose an empty profile
Account Name enter T-Mobile WAP
Press Options
Press Done
APN enter wap.voicestream.com
Press Options
Press Done
User Name
Password
Auth. Type choose Normal
Press Done
Press Save
——————————————————————————–
Create Profile
Select Menu
Select PIM
Select Messages
Select MMS
Select Message Setting
Select Server Profile
Select a Profile
Select Edit Profile
Select a profile
Choose Edit Profile
Rename Profile enter T-Mobile MMS
Homepage enter http://216.155.174.84/servlets/mms
Press Options
Press Done
Data Account select GPRS
Select T-Mobile WAP
Connection Type select HTTP
Proxy Address enter 216.155.165.050
Port enter 8080
User Name
Password
Press Done
Activate the profile

i what to go back to my gsm preferred

1)power on KE970 without SIM2)type 2945#*#3)selcet "Factory Reset", now it will reboot. now OK!

how can i pen the gprs setting of cherry mobile w1

Hi,


I have never heard of that website.This is the first time i have heard this name.

Any further help, let me know.

Thanks for using "Fixya".

try 1234 or the phone lock/Sim lock password if you created one