Dymo Office Equipment & Supplies - Recent Questions, Troubleshooting & Support
My Dymo 210D will not feed the tape. The little
My works Dymo LabelMANAGER 210D broke down because of a weak construction. The tape cartridge door pulls via a spring the print head towards the roller. Its plastic lever couldn't handle the strain. I repaired it with a peace of locking wire, as you can see on the picture. Greetzzzzz Arno
11/13/2023 12:14:35 AM •
Dymo...
•
Answered
on Nov 13, 2023
Dymo 4XL Label Printer 10% of the time fails to print, says "Dymo 4XL is in an error state" and nothing happens.
If you're experiencing an "error state" with your Dymo 4XL Label Printer, there are a few steps you can take to troubleshoot and resolve the issue:
- Check the connections: Ensure that the USB cable connecting the printer to your computer is securely plugged in on both ends. If using a USB hub, try connecting the printer directly to a USB port on your computer.
- Restart the printer and computer: Power off the printer and disconnect it from the power source. Restart your computer as well. After a few moments, reconnect the printer to the power source and turn it on. Wait for it to initialize.
- Update the printer driver: Visit the Dymo website and check for any available driver updates for your specific printer model. Download and install the latest driver software for optimal compatibility.
- Clear any print jobs: Open the print queue on your computer and ensure there are no pending print jobs for the Dymo 4XL. If there are any, cancel or remove them.
- Verify correct label settings: Double-check that you have selected the correct label size and settings in your printing application or software. Ensure that the label size matches the labels you are using.
- Check for obstructions or label jams: Open the printer and inspect for any obstructions or label jams that could be causing the error. Remove any stuck labels or debris, if present.
- Reset the printer: Locate the small pinhole on the back or bottom of the printer. Insert a paperclip or similar object into the pinhole and press the reset button inside for a few seconds. This will reset the printer to its default settings.
- Contact customer support: If the issue persists, it's advisable to reach out to Dymo customer support or consult the printer's user manual for further assistance. They may have additional troubleshooting steps or provide guidance specific to your situation.
How do I reset my Dymo LabelPOINT 350 Printer
To reset your Dymo LabelPOINT 350 Printer, please follow these steps:
1. Disconnect the power cord from the wall outlet and then disconnect the power cord from the back of the printer.
2. Press and hold down the 'Function' key.
3. While still holding down the 'Function' key, reconnect the power cord to the back of the printer.
4. Release the 'Function' key after the printer starts up.
5. Disconnect the printer from the power cord once more.
6. Reconnect the power cord to the wall outlet and then reconnect the power cord to the back of the printer.
7. Your Dymo LabelPOINT 350 Printer should now be reset.
My Dymo LetraTag will not
I have the same problem with my printer. New batteries no corrosion not used very much and will not turn on. Did you ever find an answer that worked?
My dymo letratag prints only
Your cassette tape has probably become unthread. Take the cassette out of your handheld printer. Make sure that the tape is fed under both claws on each side of the tape. If the tape is only under one claw, your label will not be flat and will only print the bottom half of the letter on your label.
Tape Jam
There may be a small piece of label cutting stuck in the gears.
remove the label cartredge, you will see a white gear set between the pinch wheel and the print head. Use a micro drive or something strong and give the gears a little help while pushing the print button. You may have to do this several times. Be careful not to use too much force as this may knock a tooth off. Good luck.
My Dymo continues to print prefet labels.
My Dymo LetraTag won't print anything. What is
Yep, same thing happened to ours. It would reel the label tape through and sound as if it were printing but nothing would show up. We replaced the batteries and it works perfectly again.
How can I cancel printing on my dymo?
If you are printing from a computer, the print job will be in the bottom right taskbar (click the small arrow). Open the icon and in the heading Cancel Print Jobs.
Or you can go to Start - Settings - Devices - Printers and Scanners and choose the printer and cancel from there.
Not finding what you are looking for?