Dynex Computers & Internet - Recent Questions, Troubleshooting & Support

Unfortunately, Dynex no longer provides driver updates for their 1.3MP webcam on Windows 7 as the product has reached its end of life and is no longer supported. However, you may still be able to use the webcam with the existing drivers that came with it or with the generic drivers that are built into Windows 7. To check if your webcam is recognized by Windows 7, follow these steps:

1. Plug in your Dynex 1.3MP webcam to your computer's USB port.
2. Click on the "Start" menu and select "Control Panel".
3. Click on "Hardware and Sound" and then select "Device Manager".
4. Look for the Dynex webcam under the "Imaging devices" or "Cameras" category. If it is listed, then your webcam is recognized by Windows 7.

If your webcam is not recognized by Windows 7 or is not functioning properly, you may want to try downloading and installing a third-party driver update software like Driver Booster or Driver Easy. These programs scan your computer for outdated or missing drivers and automatically download and install the latest versions for you. Alternatively, you can try searching for a compatible driver on third-party driver download sites, but be cautious as some of these sites may contain malicious software. It is always recommended to download drivers from the manufacturer's website or from trusted sources.

download the driver from this page where also you find some documentation that can help you

Sergio
http://www.dynexproducts.com/pc-692-10-dynex-13mp-web-cam.aspx

Hi Jim, Some psu manufactures put a plastic sleeve over high voltage components as a safety measure. Is the piece you have flat or tubular?

http://driverscollection.com/?H=DX-WC100&By=Dynex

http://www.toggle.com/lv/group/view/kl225782/Dynex_DX-WC100.htm


After Download and connecting webcam to PC/Mac.

• Open Skype
• Log in
• Click on Tools=>Options
• There click on Video settings => Webcam settings.

I hope this helped you out! If it did Thumbs up ;)

With kind regards,

MisterN

The driver for DYNEX DX-WGDTC is free and the following link.

http://www.dynexproducts.com/productSearch.html?query=pci+wirelesses&resultsPerPage=all

My keyboard misses letters when I type my email

Plug the keyboard into another device and if it works, then your Chrome laptop is at fault. If the keyboard does not work in a different device, toss it and buy another one, unless it's new, then take it back to the store where you bought it.

This sounds like you need a smartcard or your current smartcard is not working anymore. Your local provider probably "scrambles" the service over the line and you need to buy a certain subscription to see this channel. Please get in contact with your cable provider.

Assuming you are using a newer version of Windows...Insert nano adapter into an available USB slot and the system should auto detect the adapter/mouse. Setup guide is available at https://www.dynexproducts.com/pdp/DX-NPWLMSE/2380794

go the the manufacturers web sit for the make and model of the mouse download the driver compatible with your operating system , and run also you can go to control panel select the mouse section and check for compatibility in properties section it is there that you can alter mouse speed , clicks , scrolling and the like

The Dynex DX-PWLMSE uses a 27 MHz frequency wireless connection between the mouse and a specific USB receiver. For the specifications, see https://www.dynexproducts.com/pdp/DX-PWLMSE/8632063 . To use the mouse, you need to press the Eject button behind the scroll wheel. This lets you open the battery/USB storage compartment. Put two AAA batteries into the mouse. Then remove the USB adapter (it's between the two battery slots). Close the storage compartment and put the USB adapter into an available USB 2.0 slot on the computer with a version of the Windows OS above Windows 98. (Note: the specifications I see indicate Dynex wrote drivers for Windows Vista. It may not work with Windows 7, 8 or 10.) Make sure that the computer is on and can get driver updates from on-line sources. Turn on the mouse and it should auto-pair with the receiver. If there is no response, try pressing and holding the connect button on the bottom of the mouse. I'm not aware of any vendors that sell the USB receiver for this mouse. The manual for the DX-PWLMSE is available from Manuals Lib: https://www.manualslib.com/products/Dynex-Dx-Pwlmse-Wireless-Optical-Usb-Laptop-Mouse-4908.html . I hope this helps. Cindy Wells

That could be the graphics card, power supply in either the monitor or the computer, motherboard or the monitor. You might try a different monitor as a test to try to narrow down the problem..

Reset router and make sure you plug in switch first to the back of the router. Then plug in computers to the switch and restart them. Router/modem attaches itself to last device used and needs to be reset to clear memory. Computers need to reconfigure IP address after reboot hopefully automatically. If fails replace it with dual band router.

The purpose of a switch is communicate with several other devices. The ports out are each independent; such as a 5 port Gigabit Ethernet switch. The main input is direct to a source (like a wireless or wired Modem) and in turn it communicates between the modem and any one of the 5 independent lines OUT (usually out to another device, such as another computer). If the switch fails to communicate with other devices, it may be defective or the power supply could be at fault. Check connections. Especially check the main cable from the modem to the switch.

DYNED masde a LOT of wireless optical mice and I highly recommend you install the CORRECT drivers for your Operating System! ** COME BACK with more info! ** Anthony IF this information helped you ~ how about a THUMBS -UP!