Dyson Vacuums - Popular Questions, Answers, Tips & Manuals


Send it back under warranty. There is an article about the Swing Valve

https://www.google.com/search?q=repair+a+Dyson+DC07+valves

Dyson Vacuums | 25 views | 0 helpful votes


The brush is activated by the suction of the vacuum. If it stops spinning, that means that either there is a broken part inside housing that surrounds the brush, thereby lessening the power of the suction to spin the brush, OR there is a lot of debris, usually hair, trapped and tangled around the brush. That can cause a troubling amount of friction and cause it to stop spinning. Either way, you will need an Allen wrench set to open up the trigger head. I found this video on youtube which details how to do that. It's not my video, but it is helpful. https://www.youtube.com/watch?v=FwNDO3pUxzM

Dyson Vacuums | 48 views | 0 helpful votes


Return it to Dyson under warranty.

Dyson Vacuums | 17 views | 0 helpful votes


Dyson has one of the best Support websites as well as the best cleaners. See the videos

https://www.dyson.com/support/journey/guides/12009-01.html

Dyson Vacuums | 31 views | 0 helpful votes


If they are the cordless ones there is thumb screw on top twist it to the left and pull up.

Dyson Vacuums | 21 views | 0 helpful votes


If it is pulsating, it needs to be tuned up. No power, replace battery.

Dyson Vacuums | 92 views | 0 helpful votes


Odds are it's overheating and can't breathe. Check for clogs in the wands (they are very thin in diameter). They can also clog in the lower hose and/or the long hose you use for attachments. If all that is clear your filter could be clogged. But it definitely sounds like it's overheating.

Dyson Vacuums | 63 views | 0 helpful votes


If you are having battery issues you'll either need to replace the battery or the charger. If it is still under warranty contact dyson and they will walk you thru how to replace the parts you need. The batteries on these in my experience go bad fairly often. I throw quite a few dyson rechargeables away per month where I work.

Dyson Vacuums | 70 views | 0 helpful votes


Most of the time when I run into this problem it means there is a malfunction in the actual unit itself. More than likely you will need to replace it.

Dyson Vacuums | 57 views | 0 helpful votes


The high pile is stopping the brush roll from spinning. The V6 is a handy tool, but it’s not the right one for thick pile rugs

Dyson Vacuums | 33 views | 0 helpful votes


Dyson's site reports: "A flashing red light indicates that there is a fault, please call the Dyson Helpline."

Dyson Vacuums | 1,985 views | 0 helpful votes


It might need a new filter.

Dyson Vacuums | 72 views | 0 helpful votes


Check for clogs or broken belt(s).
Some model are more cost-effective to replace the entire unit than have it repaired.

Dyson Vacuums | 66 views | 0 helpful votes


Dyson's site says, "A flashing red light indicates that there is a fault, please call the Dyson Helpline."

Dyson Vacuums | 81 views | 0 helpful votes


you unscrew that side of the ball by turning the purple middle part until it comes off. Twist off the filter .

Dyson Vacuums | 79 views | 0 helpful votes

Not finding what you are looking for?
Dyson Logo

10,189 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Nick Olsen

Level 2 Expert

196 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...