E-Machines Computers & Internet - Page 8 - Recent Questions, Troubleshooting & Support
My boot devices are disabled
Hi
Normally for Pcs and laptops the booting devices can be found in the CMOS/BIOS settings, when you start up the pc/laptop you normally press esc f1 f2 etc, this allows the user to enter into the CMOS/BIOS setting.
Under the Boot tab you will see all the devices you boot from they will be enable/on or disabled/off check them to see which devices are on and off.
The last tab has a load default option if you select it and exit and save these changes it will automatically enable all the default devices in order.
Your pc/laptop should boot up normally now
Cheers
1 GB increase
hi
not every motherboard or on board video is compatible with windows 8
what windows was it running previously
windows 8 was designed for 64 bit platforms which requires 4 gig of ram but you have to also take into account the other hardware components and there maximum configuration
i have run win 8 on 2 gig of ram but it struggles with you tube downloads
i upgraded the ram to 4 gig and run win xp win 7 and win 8.1 on the hard drive
cheers
How can I adjust the volume on my monitor
dose your monitor have speakers ?
otherwise use your mouse & at the bottom right corner of your screen there will be a icon that looks like a speaker click on that & you will see the volume bar
Boot problem
thanks for your reply i have replaced the battery with a new one and the same problem still exists... why does it not boot from power button?
Emachine running SLOW and Freezes - 1 year old
Here are some suggestions: First of all . Do you have an anti virus installed on your husband's machine ? Viruses can slow the machine and even kill it permanently ( so be careful) . Just install an anti virus and you'll solve the problem . If you are already have an anti virus , then just run a full system scan and watch what will happen and follow the recommended steps that will be given by the anti virus [ There are a lot of anti virus softwares in the market ] but if you suspect that your system is already infected i recommend you to use (Avast professional edition) because it can make a boot scan , that means after you install it , it will ask you if you want to make a boot scan , just agree with it and it will reboot the system and start a boot time scanning , meanwhile you should watch it and give it the right orders if it detected a virus infection .
Here is another suggestion : There is a certain software you could install it . This software can help your machine and detect any problem on your husband's computer but viruses . this software is called (TuneUp utilities) . You can download it from here www.tune-up.com . just try it and you'll be satisfied with result .
if that didn't help just contact me again and i'll help you as possible as i can .
good luck .
My computer has no signal
Hello, Sounds like you don't have the right power supply, only and emachine power supply from emachines will work.
Minecraft
Is it legitimate copy of Minecraft? And if so then it's probably just server problems at the moment that will resolve eventually in due time.
Power cord on motherboard
Hello, The power to your motherboard is coming from your power supply if it is bad you will have to get another emachine power supply, for emachines, only emachine parts work.
Wireless connection
try downloading the driver again and installing from the begining
https://panam.gateway.com/us/en/emac/product/default.aspx?modelId=1663
Not acknowledging SD card
E-Machines eMachines Desktop PC Sd card reader ... - Fixya
www.fixya.com > ... > E-Machines > E-Machines eMachines Desktop PC
SD card in the 9 in 1 card reader, but it does not read. please check the SD Card ...SD card readers aren't capable of reading SDHC cards, even though the card will physically fit into the card reader slot. ... E-Machines T5082 PC Desktop.
Not finding what you are looking for?