Electrolux Washing Machines - Recent Questions, Troubleshooting & Support

Could be a defective control board

Electrolux... | Answered on Dec 28, 2019

Check the drum has emptied properly.

Electrolux... | Answered on Dec 19, 2019

Sounds like you have a belt that slips under load. May need replacing.

Electrolux... | Answered on Dec 07, 2019


Electrolux... | Answered on Nov 30, 2019

Hi Daren Deen,
I think you can send them an email at customercare@electrolux.com.au and they would create a ticket for you and they will give you detailed instructions on how to reset it.

Electrolux... | Answered on Nov 24, 2019

Hey Desmond, thank you for your inquiry!
From my understanding your Electrolux washer is displaying an error code of 33. I am showing that is an invalid error code. This could be a miscommunication within your control panel. I would suggest performing a reset on your washer and you can do that by disconnecting power from it for at least ten minutes. If the reset does not help correct the issue and the error code comes back please comment back. Also, let us know your model number. You can locate the model number of the door frame of your washer. Once I have that information I would be able to assist you further. -Matt

Electrolux... | Answered on Nov 12, 2019

Level offset error. remove the air tube from the cpu and blow it

Electrolux... | Answered on Nov 09, 2019

The emergency button has been pressed. Remove the emergency by pulling it out

Electrolux... | Answered on Nov 09, 2019

The white actuator box on the door locking mechanism is faulty. its already locked yet the machine door is open.

Electrolux... | Answered on Nov 09, 2019

Check the transformer at the back of the machine if there is an output. also check the fuse on the same transformer if its blown out. Does the cpu led light come on?

Electrolux... | Answered on Nov 09, 2019

Check the cables connecting the door locking unit on the left of the door handle and the CPU if they are broken. Also check the P. Bus cables from the power supply unit at the back of the machine coming to the CPU if there is a disconnection.

Electrolux... | Answered on Nov 09, 2019

see if belt under unit bad or agitator cogs under agitator first see if pump and hose ok

Electrolux... | Answered on Oct 19, 2019

remove agitator and see if cogs are bad or plastic plate with screws gears under are probably bad

Electrolux... | Answered on Oct 19, 2019

Hi try unplugging the machine for ten minutes this sometime resets the computer inside.

Electrolux... | Answered on Oct 06, 2019

Not finding what you are looking for?
Electrolux Logo

2,386 questions posted

Ask a Question

Usually answered in minutes!

Top Electrolux Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers


Level 3 Expert

411 Answers

Poppa Maddo
Poppa Maddo

Level 2 Expert

372 Answers

Are you an Electrolux Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides