Element Electronics Televison & Video - Recent Questions, Troubleshooting & Support

How do I turn off cc on by ELEFW328 TV

They are not a good product or a good company. The two of you should start a class action law suit against the company. Lawyers will take these on free of charge because they get first bit of the amount awarded. If the two of you have issues, there will be thousands more.

Ok, I am having the same issue. I just bought my tv - same model at the Target Black Friday sale. Can I ask, did yours make a low humming noise before you changed it out. I still am within my 30 day exchange policy, so I am thinking it would be wiser just to exchange it... but my concern is, would I get one with the same problem (or worse) in exchange?

Where your Smart TV already has an app in its app pages, start that app, log onto your Netflix account (which you need to pay for) and watch away. If your TV does not have a Netflix app, give Player a try at http://www.Playora.com - this is an app that runs on a PC and lets you open content on the screen of the PC and toss it to a lot of different Smart TVs (Samsung, Panasonic, LG, Sony, JVC, etc.). Ithing, It will be helpful for you.

Main system control memory IC fault. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

I lost the screws for my legs for my 50 inch element TV????

http://www.fixya.com/support/t26576974-element_tv_no_picture_good_sound_but

Some sets and devices have HDMI control that can turn off and on devices connected to them. Look into the settings of both devices and search for anything to do with HDMI control.

you can go to menu options, than find programming options.
Look for an option called "autoprogram" and select it. It will search and set all available channels.

There is universal remotes for this tv that you can find by googling "elements electronics remotes":

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electro-medical.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Without its remote control, you can't do a system reset to this set. Try a Hard Reset to this set, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done. If a hard reset do not help, you should buy its original remote control from its authorized service center.

There aren't any buttons to push on the remote. There are 3 main boards in the TV: Power supply, main, and T-Con board. Do this test. With the TV on shine a flashlight on the screen and look for a faint picture. If you don't see one, then the T-Con board is bad. If you do see one then the backlight driver is not turning on the the white light for the screen. This driver can be on the power supply or the main board. It depends on the model. Since your TV is 10 years old you may want to get a new TV.

it could be the t-con board going. or the screen connector ribbon is lose. or even just the connection cable to the t-con board. if you push gently around the edge of the screen if the pitcher gets better or worse then its the screen connections. sometimes can be fixed with cracking the cable or slightly heating the area and packing, but this is with the led screen panel out. but would think its more a t-con board filing.