Encore Computers & Internet - Answered Questions & Fixed Issues

perhaps put the disk in to the computer, let it load up, then maby copy the picture to word or other notepad-like thing and try printing from there

If PrintShop Deluxe 6.0 is no longer printing your projects and you are unable to save them as JPRG after uninstalling and reinstalling the software, there may be a few other things you can try to fix the problem:

1. Check the printer settings: Make sure the printer is properly set up and connected to your device. Check the printer settings to ensure that it is set to the correct printer and that the printer is not experiencing any errors or issues.
2. Check for updates: Check for updates for the software and the printer driver. Installing any available updates may fix the issue.
3. Check for compatibility issues: Make sure that PrintShop Deluxe 6.0 is compatible with your version of Windows 10. If the software is not compatible, it may cause issues with printing and saving projects.
4. Repair or reinstall the software: Try repairing or reinstalling the software to see if it fixes the issue. Make sure to follow the instructions provided by the manufacturer or technical support team to properly uninstall and reinstall the software.

If these steps do not help, you may need to contact Encore or a technical support team for further assistance. It is also a good idea to check the documentation or manual that came with the software for any troubleshooting tips or recommendations.

delete it.then update your computer. and check if theres dust or anything that could off got in the computer

http://c.ancestry.com/Affiliate/Knowledgebase/contact/contact.html

Since the 'base' and 'top' of any prism have the same shape, the surface area can be found by

• surface area of prism = 2 * area of base + perimeter of base * H

So for the rectangular prism in your example..

• surface area = 2LW + 2(L+W)H
• = 2 * 7 * 4 + 2*(7+4)*5
• = 56 + 2 * 11 * 5
• = 56 +110
• = 166 sq cm

Hope this helps

'Nostalgia Audio' equipment is made is China at the cheapest price point and is badged with an English name for the unsuspecting US and UK market. There are only some videos, no manuals and no maker website or distributor website, never a good sign. https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk02WRQfUzNjSsn-8ntGZC_Fm8h2nXQ%3A1610474857615&ei=aeX9X8LxJJi6tAaB5p5o&q=encore+technology+9369omo+manual ..

Check the drivers if properly installed

Hello,

Assuming you have not switched to Windows Vista with the new hardrive - as Mavis Beacon 17 does not work in that platform - then-
it sounds as though the file is corrupted. I would uninstall and reinstall the product. Unfortunately, difficult to do with out a cd or good original disk to start from. If you have your order number or purchase numbers when you bought your download, then customer support should help you get a clean download.


Here is some information on system configuration- it is similar for the setup of Mavis beacon 17

http://www.broderbund.com/store/broder/Content/pbPage.ProductSupportMain

wrong site this is fixya not your bank or dealer

I don't know for certain but I have a theory - I believe some programmes collect and use bits and pieces of the Windows operating system rather than being a standalone completely self-contained programme. I think over time and a number of restarts Windows manages to claw back some of those bits and pieces but not all. This effectively stops the programme working properly or altogether and when it is finally uninstalled the remaining bits and pieces of Windows disappear also so when it is reinstalled some essentials are absent... Windows can function fairly well with lots of bits and pieces missing. It is just a theory you understand, based on my experiences and observations.

HI, What is the windows error?

Hi, What is the windows error ???

Some old laptops only have USB1 ports. The G adapter may be a #2 or #3 USB device. If the laptop is a ONE, the connection is too slow to adapt to a modern speed of G or N. You may have to use direct wire from the modem to the laptop in order to communicate with the internet.

Unistall the drivers under drivers and software and use the right drivers? https://www.driverguide.com/driver/detail.php?driverid=1746586

I hope you didn;t throw out your old computer, as it it is almost impossible to use some xp and vista op software on other computers. Put your file on a flashdrive and see if you can import it.

final use as the 4.3L V6 engine used in Chevrolet. Its phaseout marks the end of an era of Chevrolet small-block engine designs if you want reviews on best reel mower so visit here Best Reel Mowers Reviews 2017 Top Picks Lawn Gears

printmaster 1 was for windows 98, ver 17 is for XP. it depends where your saved projects are. if they are on CD media then that is READ ONLY and they must first be transferred to a C:\ drive and their ATTRIBUTES for each and every file/folder of the project need to have the Read Only attribute removed. you can do that via CMD.exe eg if your project was inside a folder called c:\myprojects\????? then you would type in ATTRIB/S c:\myprojects\*.* -R then your projects might be valid as they could be UPDATED/Altered by the new version but thats just a guess.

that sounds like a fault. maybe you should check for any firmware updates but that process may effectively erase your router settings so it would need reconnecting to your iSP afterwards...probably. good luck youll need it.

A Router(which can include a Modem as part of it) has an IP address. Opening a Browser at that address will get its Login page up. Logging in will show its MENU / Up time/ main page where you set it up. eg type in your new ISP details / Login username password. the long number you quote is NOT a name of a router model(it a MAC address of a Pro-Nets product). you can look here for an example login for one of their products a WR850RD but have no clue what actual product you have.. "https://www.cleancss.com/router-default/PRO-NETS/WR850RD" which some kind techy person will show the IP address and login details for you. However they are usually written on the LABEL stuck to the ROUTER.

print shop 3.0 is compatible with XP SP3 vista SP2 and windows 7. to install it correctly you must be logged in as administrator or right click the installation setup and choose Run As Administrator. if you dont do that it doesnt install correctly if you are trying to use it on any other windows system it wont work. print shop 4.0 is compatible with W8 or W10. once installed you may also have to Open the program using Run As Administrator too.