Epson Artisan - Recent Questions, Troubleshooting & Support

There are two gears that are made of plastic that have hard rubber toothed sprockets pressed on them. These sprockets split and allow the drive motor to slip. Epson will only sell the motor assembly and not just the gear. I used a dot of supperglue to repair the sprockets and all works fine now.

I have epson wf7610 when i on give msg in lcd turn power off documentation error code oxC1

If you are face epson printer related any problem you can visit our site.https://www.epsonprintersupport247.com/fix-epson-printer-error-code-0xe3/ and get the more information

Try changing the print paper type to something other than plain paper. Use the matte paper setting, or the photo glossy. The printer will lay down more ink at these specialty settings.

Uninstall and re-install

I just had the same issue but with the 810, which is basically the same. What I had done before that happened was turn on the "Automatic Head Maintenance", then after turning on the printer again the next time the error happened always a few seconds after it started...really frustrating.The solution was turning off the "Automatic Head Maintenance". Do this as soon as you have access to the menu, because after a few seconds it will show the error and the touch menu will not work anymore. So as soon as the touch menu shows press Setup > Maintenance >Automatic Head Maintenance and turn it off.Please reply and let me know if it works.

hi. try this link might help you get it sorted. Epson will not recognize it own cartridge Google Search

Hello, Your printer makes a "grinding sound". This is usually due to two things: 1. A dirty printhead rail. It is either ink residue or dry. Try gently cleaning it with some water. 2. Paper pick up roller(s) not picking up. Clean them with a damp terry cloth towel or a multi-purpose cleaner. If you have unable to fix it please contact me at 1800-204-4427. I can help you out. Good luck!!

why is the wifi orange blinking and the green isn't on?

Try removing the rear duplexer unit and see if there may be something in the way. You will be able to see if the tray is flush to the end. If you need further help, I’m available over the phone at https://www.6ya.com/expert/alex_22751bbefa74c3d0