Fisher and Paykel Washing Machines - Page 6 - Recent Questions, Troubleshooting & Support


you will need to remove the inner bowl and clean it all

Fisher and... | Answered on Apr 21, 2018


did you wheck the windings on the pump if they are discoloured in any way replace it they get hot smelly and then blow the main board

Fisher and... | Answered on Apr 21, 2018


check pump for burnt windings,if good faulty main computer board

Fisher and... | Answered on Apr 21, 2018


its probably the rotary position sensor,it would help if i knes what lights are on at the time

Fisher and... | Answered on Apr 21, 2018


make sure yourhot and cold taps are on even when on a cold wash and see how you go

Fisher and... | Answered on Apr 21, 2018


check drain pump for burning smell sniff it or and discolouration of the copper windings

Fisher and... | Answered on Apr 21, 2018


i need to know which lights are lit up

Fisher and... | Answered on Apr 21, 2018


blocked ,jammed or fulty drain pump

Fisher and... | Answered on Apr 21, 2018


under the top of the machine on the right there is a reed switch which is actic=vated by a magnet in the lid remove the two bungs and screws so you can lift the top up a bit and you will see it there one screw to remove it if its corroded or swollen its faulty either repace it or as a easy fix cut both wires off it and join them together and tape up, this should do it

Fisher and... | Answered on Apr 21, 2018


if it keeps filling until it floods the it has afaulty transducing which is locatedin the mainboard which will have to be replace

Fisher and... | Answered on Apr 21, 2018


if you didnt run the pump on the bench dont be fooled by any readings it canstill be stuffed

Fisher and... | Answered on Apr 21, 2018


check out the drain pump as it is linked directly to the main board any burning smell or discolouration of the copper windings replace it

Fisher and... | Answered on Apr 21, 2018


its easy if you know how hahahah the pump either has something jammed in it or its faulty

Fisher and... | Answered on Apr 21, 2018


main computer board is faulty

Fisher and... | Answered on Apr 21, 2018


not alot u can do but replace the board

Fisher and... | Answered on Apr 21, 2018


burning smells are most common from the drain pump remove and sniff it if it smells like its been getting too hot replace it

Fisher and... | Answered on Apr 21, 2018


repace the thermostat

Fisher and... | Answered on Apr 21, 2018


ok if when you push pause the water stops its not your solenoid but the transducer which is built into your main computer board which you will need to replace

Fisher and... | Answered on Apr 21, 2018


this usually means warm wash is selected but only cold tap is on try turning hot tap on even for a cold wash

Fisher and... | Answered on Apr 21, 2018

Not finding what you are looking for?
Fisher and Paykel Logo

4,179 questions posted

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...