I have a Frigidaire Dryer and the outside of dryer It was hot to the touch and hadn't been used in couple days ?
f the outside of your Frigidaire dryer is hot to the touch and the heating element appears to be glowing red hot when the knob is not in the off position, it is likely that there is a problem with the dryer's heating element. It could be shorted, burnt, or damaged in some other way.
It is also possible that there is a problem with the dryer's thermostat, which regulates the temperature inside the dryer. If the thermostat is not functioning properly, it could cause the heating element to stay on for too long and overheat the dryer.
It is recommended that you stop using the dryer immediately and unplug it from the power source. It is not safe to continue using a dryer that is overheating or has a malfunctioning heating element. It is best to have a qualified technician inspec
Window ac/heater freezes up when using the heater?
This is likely due to a lack of airflow. Make sure that the air filter is clean and that there are no obstructions blocking the air intake or exhaust vents. If this does not resolve the issue, you may need to have a technician come out and inspect the unit for any other potential issues.
My Frigidaire dishwasher has recently started to act up. It starts the wash cycle but doesn't finish it.
Sounds just like my Whirlpool dishwasher. If you have the documentation that came with it look through it for a "reset" method to re-calibrate the dirt sensor in the unit. If you don't have the owners manual try to "Google" an owners manual or a "technicians" manual to find a reset or a re-calibrate procedure. Mine consisted of pressing certain control buttons at the same time, after which the unit ran through a calibration cycle that took about as long as a normal wash, and it has worked great ever since.
Frigidaire gallery ice maker
Check your filter. When filters get old they can restrict the water enough to cause issues. The cubes start to get smaller and from time to time the ice maker will freeze up.
How to change frigidaire phsc239dsb5 refrigerator change from celsius to fahrenheit
The steps to change the temperature display from Celsius to Fahrenheit on a Frigidaire PHSC239DSB5 refrigerator may vary depending on the specific model, but generally, it can be done through the control panel. Here are some steps you can follow:
- Locate the temperature display on the control panel of the refrigerator.
- Press and hold the "Option" button until the display starts flashing.
- Use the "Option" button to toggle through the display options until you reach the temperature display setting.
- Use the "+" or "-" button to switch from Celsius to Fahrenheit.
- Once you've made the desired change, press the "Option" button again to save and exit.
Note: The specific instructions may vary depending on the model, so you may want to consult the user manual or the manufacturer's website for more detailed instructions.
Hi temp/heat dry lights flashing on a frigidaire dishwasher
Please read!! This happened to us and we paid money to have repair men come look and they didn't solve the problem. Your door latch is being caught on the bottom of your counter top. Pull your dishwasher out a half an inch and try again. It fixed our problem when we had this happen!
Can use gas for my liquid porpane grill
Yes you can as long as your home uses LPG. You can not use 2 regulators. If your outside line is after your home regulator you need to eliminate the regulator on your grill. LPG products operate on 11" of water column, that's about 1/2" PSI.
Thanks for using Fixya
Jerry
I have a Frigidaire oven that's does not heat up to high temp.
If your Frigidaire oven is not heating up to the high temperature, there could be a few possible causes:
- The thermostat may be malfunctioning: The thermostat controls the temperature of the oven and if it's not working correctly, it could prevent the oven from reaching the high temperature.
- The heating element may be malfunctioning: If the heating element is not working properly, the oven may not be able to reach the high temperature.
- The control board may be malfunctioning: If the control board is not functioning properly, it may not be sending the correct signals to the heating element or thermostat, preventing the oven from reaching the high temperature.
- The oven may be in a cleaning or self-cleaning cycle: when the oven is in a cleaning cycle, the temperature is raised to a high level to clean the interior of the oven.
- The oven may be in a energy saver mode: some ovens have a energy saver mode that decrease the temperature by a certain degree to save energy.
Electrolux ac heat/cool window unit blows cold air on heat.
There are a few possible reasons why an Electrolux window AC unit may be blowing cold air when set to heat mode. Here are a few things you can try to fix the problem:
- Check the thermostat settings: Make sure that the thermostat is set to "heat" mode and that the temperature is set higher than the current room temperature.
- Clean the air filter: A dirty air filter can restrict airflow and prevent the unit from heating properly. Clean or replace the filter according to the manufacturer's instructions.
- Check the air ducts: Make sure that all of the air ducts are properly connected and that there are no leaks or blockages.
- Check the compressor: If the compressor is not running, the unit will not heat. Make sure that the compressor is running and that the compressor's fan is functioning properly.
- Inspect the heating element: Make sure that the heating element is not broken or damaged and check the continuity with a multimeter.
- Contact the manufacturer or a professional technician if the problem persists or you are unable to troubleshoot the issue.
Note: Before you start troubleshooting, make sure to turn off the power to the unit and unplug it from the electrical outlet.
Not finding what you are looking for?