Frigidaire Induction Stove Top Keeps Locking
Hi,
please make sure that there is a pot or pan on the stove top when you start it. It might be locking as a safety mechanism if it doesn't sense an object ready to be heated. Otherwise, please refer to the troubleshooting section of you manual to help turn off the locking mechanism.
Thank you.
Frigidaire dryer showing the world"loc" & won't start
The control panel lock is engaged. This keeps the dryer from being turned on by accident while cleaning the panel (or by a small child). There should be a line with a padlock symbol between two buttons on the control panel indicating the ones to press and hold to toggle the lock feature. On some Frigidaire dryers, the buttons to press and hold are Options and Select. You need to hold the buttons for 10+ seconds. The LOC message should disappear when you have held the buttons for long enough. However, if you do not release the buttons, the lock will toggle back on.
I hope this helps.
Cindy Wells
11/14/2022 11:52:05 PM •
Frigidaire...
•
Answered
on Nov 14, 2022
I left silicone guard on grates and put on self cleaning. My oven is now filled with a white powder.
Thank you for your inquiry, Cheryl!
I understand that you left the silicone guard on the grates and turned on self-cleaning, now you have white powder inside of your Frigidaire range. This can be removed by using hot water, baking soda, and a non-abrasive cloth. It may take elbow grease in order to remove the white powder. I would recommend not using the oven until you have removed the white powder. I hope this information is helpful for you. -Matt
Oven does not heat up
most likely you have a bad ignitor,if it glows and it doesn't ignite the flame within 40 seconds the ignitor is bad.just because it glows doesn't mean it's good.
10/23/2022 10:00:07 AM •
Frigidaire...
•
Answered
on Oct 23, 2022
My frigidaire oven bake or broil wont heat up stove top is fine
Good Afternoon James, I appreciate your post!
Based off the information you have provided your Frigidaire range will not bake or broil but the cooktop is working properly. This could be a potential issue with your control panel or elements. Since it could be anyone of these underlying issues I would suggest having a professional technician out to perform a proper diagnosis and repair. Having a technician out will prevent any unnecessary part purchases. Best of luck! -Matt
Code d1 sp
Had this problem and called customer service and they had no idea. Turns out it's an alert that the suspense is jammed (DISP). Clear it out with your hand and you should be good to go. I figured this out after my kitchen was full of puddles when I got home from work.
Not finding what you are looking for?