Frigidaire Washing Machines - Page 2 - Popular Questions, Answers, Tips & Manuals

Question edited for clarity. Question moved to Affinity. Try a full system reset. If that doesn't work, you need a service call.

Resetting the Frigidaire Affinity washer

• Unplug the power source or turn the circuit breaker off for a few seconds.
• Then plug the power back on to reset the washer to default settings.
• Now press the cancel button to cancel all commands.
• And in the next step press and hold the spin speed and soil level buttons together for four to eight seconds.
• Hold the buttons until you hear some signal sounds and then leave the buttons.
• After that open the door for more than 2 times and make sure it gets closed again each time. After this, your machine has been properly restored to proper default settings. This will lead your machine to work properly again.

..

https://www.appliancepartspros.com/search.aspx?model=met1041zas2

It looks like there isn't a way. you could phone them and ask? https://www.frigidaire.com/Owner-Center/Contact-Us/ https://www.google.com/search?q=Frigidaire+FFCD2413US4A.+change+Default+Wash ..

https://www.searspartsdirect.com/diy/symptom/dryer-repair/1234594/door-won-t-stay-shut/dryel07

damaged drum --bracket --motor

Suspect the cycle timer

possible bad bearing on drum

Question edited for clarity 'make model (what it is). Question moved to Frigidaire Washing Machine. This is the Transmission unit, which I would say puts it beyond economical repair. Frigidaire H Transmission #WCI-134735700 List Price: $765.13 Sale Price: $637.61 On first reading, I thought it sounded like the pump, but then no agitation, but it spins. This makes it sound like the control board. In view of the confusing actions and the cost involved, I would call out a Service Engineer. https://www.partswarehouse.com/Frigidaire-FEX831FS2-Washer-Dryer-Combo-s/70205.htm ..

The water must be connected to both inputs if it has both hot and cold fill.

Check the filter and pump for obstructions.

For that many issues and for the amount of money you spent, you need to call out a technician who knows this machine. Sometimes, you just have to let the pros take over. Burnt cables is never a good sign as it can take everything with it.

GOOGLE IT ONCE

There are a couple of videos and text based articles in the link, plus disassembly. I would check connection on the control board connections and those on the lid lock. The lock has to be functioning properly to operate. https://www.google.com/search?q=Frigidaire+FFLE3911QW0+combo+washer%2Fdryer+is+starting+and+locking ..

All front loading washers will fill and drain multiple times before it finishes. Unlike a top loader, a front loading washer will take longer to run because there is no agitator and will fill with water and drain multiple times. A front loader is more energy efficient than a Traditional top loading washing machine. A washer dryer combo will take hours to complete a cycle.

Clean the filter

Water is not drained completely

The problem is with the electronic board of the device and you have to repair or replace it.

sounds like the transmission needs replaced

door switch faulty

Try pressing and holding the Delay Start button for ~3 seconds. The 'loc' indicator should go out. If you hold the button for too long, then the lock could toggle back on. If the problem persists, you may have an issue with the keypad on the dishwasher. I hope this helps. Please add a comment with the model number of the dishwasher if the control panel lock does not disengage. Cindy Wells