Fuji FinePix - Popular Questions, Answers, Tips & Manuals


Many occasions LCD on camera display never fails but back light fails unless physical damage to LCD screen. Hold a torch to display when camera is on you will see faint(black and white) image means LCD is ok but back light is failed, it's replaceable but needs little skill to replace. Or replace full Screen with backlight. This is easy. Just remove back cover, remove display by loosening flex lock, put back new display carefully lock it holding flex with one finger. Please do not touch display flex contacts.

Fuji FinePix... | 47 views | 0 helpful votes


This question is too old; however, assuming someone with similar question can be informed of the same.
Most cameras (brand/model) will require an associate software for use in tether mode. For Fuji, it would be Fuji Camera Remote application - Fuji-hyper Utility software, Canon EOS - the EOS Utility etc. Without the software, your camera becomes a SD card holder when it is connected to a computer. You can't do anything with it.
(There are exceptions though - for instance, a Sony Cyber shot DSC W30/ W40 future a AV out jack that can project AV on the computer or TV)

Fuji FinePix S20... | 75 views | 0 helpful votes


Have you got it set to macro ?

Fuji FinePix... | 170 views | 0 helpful votes


http://www.fujifilm.com/support/digital_cameras/software/finepix_viewer/ver55win/download.html

Fuji Finepix... | 1,092 views | 0 helpful votes


Try googling fo r the info...they have a huge range of details for just this sort of problem. If not, tryto access memory operation thtough your unit's memory - there should be a trigger giving initialization details. Hope this helps!

Fuji FinePix... | 59 views | 0 helpful votes


Screenshot or more details needed. This sounds like camera is faulty, but i dont want to believe it. Are we talking about web cam or like photo camera? If web cam, then just get new one from ebay, no point to have headache when they are so cheap on ebay. But if we are talking about photo camera then make sure you have right drivers installed, all usb settings are correct on cam. I mean, some devices are charging via usb and wont let you take photos unless you change usb setting to media transfer mode. Check those. But if photocam does a photoshot but image is blank then you might have a faulty photo cam

Fuji FinePix... | 48 views | 0 helpful votes


Try removing the batteries and re-install to reboot the chip.
If still same problem more than likely an internal part has failed.
Most cameras cost more to fix than they are worth. Suggest in that case to upgrade to a newer model.

Fuji FinePix... | 46 views | 0 helpful votes


Fixya is unable to recommend parts sources.

Fuji FinePix S20... | 2,211 views | 0 helpful votes


You might as well replace the camera in this case.

Fuji FinePix... | 59 views | 0 helpful votes


It often helps to specify the make and model
If it has a separate button battery that stores the settings, replacing it should solve your problem

otherwise try replacing your batteries

Fuji FinePix... | 57 views | 0 helpful votes


The lens probably has some dirt or pocket fuzz caught in it. Try spraying around it with a can of compressed air when it is extended. Also spray the lens.

Fuji FinePix... | 93 views | 0 helpful votes


I had a Finepix camera and on it was a feature for image stabilising. On the display it showed a hand. Have a look for it on the menu

Fuji FinePix... | 141 views | 0 helpful votes


take the memory card out camera and plug it into lappy

Fuji FinePix... | 36 views | 0 helpful votes


Can you just pull out the memory card and using a memory card reader input the data into the PC?

Fuji FinePix... | 94 views | 0 helpful votes


Format the card in the camera

Fuji FinePix... | 413 views | 0 helpful votes


armanhotarman

Fuji FinePix... | 169 views | 0 helpful votes


What did you do or what changes did you make to your computer since all operated fine? Bad things just do not happen - you must have done something that is now responsible for the issue. Can you repair your Vista installation - your OS may be at issue. If you have other computer with Vista try installing there to see if it works. Maybe something is now wrong with the camera - it happens.

Fuji FinePix S3... | 67 views | 0 helpful votes

Not finding what you are looking for?

-1,389 questions posted

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

Ekse

Level 3 Expert

13434 Answers

Azam Ali

Level 1 Expert

31 Answers

FIKRET UNALIR
FIKRET UNALIR

Level 1 Expert

239 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...