Fujitsu Tablets & eReaders - Answered Questions & Fixed Issues

Do you have Windows 10? As there may be an issue with screen rotation. However to check your settings:

1. Place the tablet into Pad/Tablet mode.
2. Click the Start menu and select Settings.
3. Click System.
4. Click Display.
5. Scroll down and check the status of Lock rotation of this display .

Keyboard no good. Just get a new one since you also have an intermittent situation that sooner or later will stop working permanently.

Exactly 1.5 meters?

You need to post the model number of the tablet? Different models have different requirements.

Try doing a system defragmentation, your programs may be so fragmented that loading time is impaired. Also clean up the hard drive by doing a Disk cleanup. Both of these tools are in the popup menu on the start page under the Accessories menu and then the System Tools menu.

Hi Tracey That could be a problem.... Passwords are not meant to be bypassed Otherwise what would be the point of having one. Contact previous owner Good Luck

Just had this problem myself. Go into your BIOS. make sure AHCI is disabled and Virtualization Technology is enabled. Then restart. This fixed it for me. Hope it does it for you.

Ok... after much slaving, trial and error, and just plain getting frustrated I finally figured out how to install XP on a Fujitsu Stylistic LT c-500 with EVERYTHING working!! The installation is difficult and time consuming but well worth it. Getting XP on the blasted thing is part of the difficult uphill battle... but Mr. Mark Rehorst does a wonderful job of explaining it here. Follow the directions carefully keeping in mind that you MUST have the cd-key for the EXACT CD you use... and that to install XP and get everything to work you really need at least a 20gb hdd and 256mb ram. Without those your system will be slow. Next once XP is up and 'running' you'll notice that your touchscreen is not working. Download the CIC XPen off of the Fujitsu support site... now here comes the interesting part. Unpack the driver to C:\Drivers\Pen once you've unpacked it find the file called fujpen.inf open it in notepad to edit it. You will see:
[ControlFlags] ExcludeFromSelect=*FUJ02B6
Make sure the last digit is 6 in that string... this is saying to exclude that model in the driver. If it's anything other than a 6 change it to a 6. Now then... further down you'll see:
[FPC.Mfg] %FPC.DeviceDesc0% = pendrv, *FUJ02B6
Now... remember what I said about the 6 above? Yeah... the driver is fighting with itself, help it out and change the last number to a 7. Save the .inf file. Go to your device manager right click on the unknown device and update it with the modified file... and presto changeo your touchscreen works!! Now for the other unknown device in there, it is called the Fujitsu FUJ02B1 Device Driver. Unfortunately Fujitsu dosen't include a driver for this... but if you google search it you should come across driverguide.com and they'll have it. You will have to sit through a few ads to get it... but wow... the world that is unlocked by xp on this tiny little pad is amazing! Good luck!

Hi Dave, I would suspect that a lateral force has been applied to the headphone jack of your tablet. This occurs when you accidentally pull the headphone plug out at an angle instead of straight in line with the jack. You might be able to find a repair shop to fix this. It might cost as much as the tablet. If under warranty you could try to get it replaced but Fujitsu is terrible in this department. It is ALWAYS wise to get an extended warranty for consumer electronics. People tend to not do thi9s because they shop primarily by price and the extra warranty drives the cost up to high at the time of purchase. Then comes this kind of problem and you wonder why you didn't spend the extra 20 bucks.

I would suspect that a lateral force has been applied to the headphone jack of your tablet. This occurs when you accidentally pull the headphone plug out at an angle instead of straight in line with the jack. You might be able to find a repair shop to fix this. It might cost as much as the tablet. If under warranty you could try to get it replaced but Fujitsu is terrible in this department. It is ALWAYS wise to get an extended warranty for consumer electronics. People tend to not do thi9s because they shop primarily by price and the extra warranty drives the cost up to high at the time of purchase. Then comes this kind of problem and you wonder why you didn't spend the extra 20 bucks.

It is probably a PDF (Portable Document Format) file. If you want to read it, download and install the free PDF reader from Adobe.com.

i have same problem as Elliot, please help us.

take the battery out and unplug it. Wait a minute and put it back, then try

CONNECTING VIA VGA CABLE,RIGHT CLICK ON THE DESKTOP SELECT DISPLAY,
CONNECTING EXTERNAL DISPLAY,
MIRROR ON ALL DISPLAYS
WALLA AND BOB'S YOUR UNCLE

HOPE THAT SOLVES THE PROBLEM.

My suggestion would be to look at the format of the movie files you're trying to play and search for a movie player app that matches that. If one exists then download, install and open file from SD card with that app. If for example file type is "*. flv" then search for "flv player for android". My guess is you don't have an app on the tablet that is compatible with the movie file type. Hope this helps.

i can not conect wi fi to my T 5010

how to country lock fujitsu tablet

Find the quarter-sized battery on the motherboard and remove it for a few minutes. There might be two pins nearby that read CMOS reset or BIOS reset. Shorting them together with all power removed, including the small battery, can also reset the BIOS.

(a) Ensure the Wireless Device Switch is On. Just throwing that out there. Your WiFi adapter is noting down some kind of signal strength as well, yes? (b) Try uninstalling the WiFi Adapter (Intel Centrino Advanced-N 6205 (802.11abgn 2x2), or, Atheros XSPAN HB116 802.11abgn) in Device Manager, then rebooting and let Windows reinstall the device. (c) Try updating the drivers from here. http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS There are Windows 8.1 x86 and x64 driver packages there. (d) If the device is working fine (according to Windows) but is still not receiving or sending, then it may be some antenna problem, and you'll have to contact Fujitsu Support for repair. Make sure you've registered your new tablet with Fujitsu. Post back with how this goes.

Hey, I also got locked out of my computer several days ago. I tried several free software. It took me two days and got quite messy. Unfortunately none of them work for me. Finally I made it work with Windows Password Recovery Tool 3.0 . The good news is that it works. The bad news is it is not free. You can try Windows Password Recovery Tool 3.0 . It works for me.
Check this out:http://www.windowspasswordsrecovery.com/