GE Washing Machines - Page 2 - Recent Questions, Troubleshooting & Support

possible worn belt or bad motor

GE Washing... | Answered on Sep 28, 2019

check hose if ok check pump

GE Washing... | Answered on Sep 28, 2019

possible water inlet plugged or solenoid bad

GE Washing... | Answered on Sep 28, 2019

This could be a problem with the rotating spray arms which, of course, you can't see when it s operating.

GE Washing... | Answered on Sep 26, 2019

When the machine is full, the built in sensor triggers a switch to let the machine know there are clothes inside. Check the sensors and/or switch, as they may be faulty.

GE WBSR3140DW... | Answered on Sep 23, 2019

The dispenser may be clogged.

GE Washing... | Answered on Sep 15, 2019

E43 is for "excessive drive system brake time"

Reset with
1) unplug 3 seconds,
2) hold Power & Start to display "Jr",
3) cycle thru using the Custom 2 button (3 times) to display E43,
4) hold Power & Start to clear code to E00,
5) stop.

GE Washing... | Answered on Sep 12, 2019

My GE profile harmony washer will not drain

GE Profile... | Answered on Aug 15, 2019

GE WSXH208A... | Answered on Jul 23, 2019

Try rebooting the dishwasher. Turn off the circuit breaker for 2 minutes. It will reboot when power is restored. If it's still blinking and beeping, you may need service.

GE Washing... | Answered on Jun 27, 2019

I have a GE WBSR3000GWS Model and it stopped spinning at one point as well. My service guy came out and did the procedure below and reset it with in minutes.

How to Reset your GE Washer :
1. Turn the dial like your going to wash a load but do not pull the knob.

2. Unplug the washer from the wall and wait for 30 seconds.

3. Plug the washer back into the wall.

4. Lift the lid 5 times to at least 6 inches high. Open/Close within 15 secs.

5. Pause… You should here a click. If you do not, then repeat 1 – 5 again.

6. Insert a towel or garment into the washer and then pull knob to start the wash cycle.

7. Check the wash cycle to make sure the washer is agiating and spinning during its cycle.

GE Answer Center : 1-800-626-2000 opt 3 - for more information

GE WBSR3140DW... | Answered on Jun 19, 2019

Not finding what you are looking for?
GE Logo

9,366 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts


Level 3 Expert

85222 Answers


Level 2 Expert

157 Answers


Level 3 Expert

411 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides