Generic Irons - Page 6 - Recent Questions, Troubleshooting & Support

0helpful
1answer

Frigidaire fcl-ss167

I'm having a similar problem. I've used mine quite often a few years ago and went to use it recently and now no steam. I've taken my fcl-ss167 apart and there is a water filter inside the base. The water filter may be too full of calcium carbonate to pass water. The water filter is removable but I have not yet found one to replace it.
Photo supplied.
3_18_2019_12_16_50_pm.jpg
3/18/2019 12:17:21 PM • Irons • Answered on Mar 18, 2019
0helpful
1answer
0helpful
1answer

My steamfast sf450 stopped working. I have used vinegar/water solution. Power light is on but no steam...any ideas?

There are no user serviceable parts in this device. unplug it for 2 minutes- make sure the reservoir is filled with water, and the power is off- plug it in and turn thee power on- wait for the ready light to illuminate and try to use it. good luck https://www.6ya.com/mrmmike
3/2/2019 8:48:22 PM • Irons • Answered on Mar 02, 2019
0helpful
1answer

How do I clean Russel Hobbs ceraglide iron as well as remove dirt on ironing surface

Aply colgate on the surface of the iron, waite few minutes for it to stick thoroughly then srub it off with a cloth. It comes off with the dirt.. colgate-kal2dhwsrgst4ybfqk15ysyp-5-0.jpeg
2/18/2019 8:37:31 AM • Irons • Answered on Feb 18, 2019
0helpful
1answer

Why wont my laurastar iron stop beeping...please help.

Low water sensor is the beep.have you tried re filling it?...the manual is at this web site: https://issuu.com/laurastar/docs/instruction_manual_laurastar_lift_e
2/14/2019 8:34:35 AM • Irons • Answered on Feb 14, 2019
0helpful
1answer

Iron leaks water while I am ironing, why?

You are probably not holding the iron the right way! Don’t hold the iron upside down, or don’t put too much water in at a time. Make sure that the heat on iron is turned up hot enough to burn the water fast enough so it doesn’t leak.
2/12/2019 1:59:24 PM • Irons • Answered on Feb 12, 2019
0helpful
1answer

I have a black and decker digital advantage iron, when I plug it in, it allows me to choose the setting, but it does not heat up.

The display is flashing constantly? It likely has a "defective" thermal fuse, same junk part that fails in perfectly good coffee makers.
1/29/2019 10:09:16 PM • Irons • Answered on Jan 29, 2019
0helpful
1answer

Why does theomostat on steam iron keep flashing .?

Is it a power on light? an illuminating instrument light? Many of these units have gas-filled (Neon) type lights in them and when they start to fail they flicker most times before they go completely. Not to worry though it doesn't mean the unit itself is failing. If it is the light you'll just have to do as my mother did back in the day and lick the tip of your finger and quickly tap the face (Hot Part) If hot it will make a sttt sound.
1/19/2019 4:59:16 AM • Irons • Answered on Jan 19, 2019
0helpful
1answer

Why does steam iron light keep flashing on verve max glide iron

Is it a power switch that lights up? Many of these units have gas-filled (Neon) type lights in then and when they start to fail they flicker most times before they go completely. Not to worry though it doesn't mean the unit itself is failing. If it is the light you'll just have to do as my mother did back in the day and lick the tip of your finger and quickly tap the face (Hot Part) If hot it will make a sttt sound.
1/19/2019 4:55:19 AM • Irons • Answered on Jan 19, 2019
0helpful
1answer

My Iron keep shutting off , when ironing

Most likely it is a broker electrical wire that makes random contact ( in / out) when the iron is being moved. You may have to disconnect the iron, take the upper covers out, look for broker wires and replace the wire
1/3/2019 4:11:05 PM • Irons • Answered on Jan 03, 2019
0helpful
1answer

There is no cleaning button on my new iron to clean the tank. On my last iron I would hold it down to clean hard water particles.. nothing on my new iron.

Since the new iron does not have a cleaning button, use distilled water only. Also, cleaning with a mild vinegar solution will help keep it in good shape. Just be sure and rinse the solution out.
1/2/2019 11:29:12 PM • Irons • Answered on Jan 02, 2019
0helpful
1answer

WHERE CAN i OBTAIN THE INSTRUCTIONS FOR A STEAM GENERATOR IRON THAT i HAVE BEEN GIVEN. MODEL NO.8548 BY IDEAL SOURCING LTD

Marion, I've scoured the internet and I am stumped. I'd call Walmart or someone that sells them and see if they've got one laying around or email the company.
12/30/2018 2:38:12 PM • Irons • Answered on Dec 30, 2018
0helpful
1answer

My steam press will not steam and water is leaking out from the back of it .How do I fix it ?

it is defective. you should not use a steam press (make and model unknown) when it has a leak and water could possibly contact the electric power circuit. this could be a life threatening health issue.
12/21/2018 12:05:08 PM • Irons • Answered on Dec 21, 2018
0helpful
1answer

Instructions how to use it , never got any with the iron when I bought it.

I looked ours up online just put make and model in that should help unless you mean how to actually IRON good luck I'm still learning
12/3/2018 2:02:37 PM • Irons • Answered on Dec 03, 2018
0helpful
1answer

Why does my fatal iron keep cutting every10 mins

I'd take it back unless it's old . It's prolly getting to hot .If it is an old one prolly on its last leg just saying
11/24/2018 4:16:01 PM • Irons • Answered on Nov 24, 2018
0helpful
1answer

As soon as my iron reaches the correct temp. It shuts off

It is supposed to shut off at the temperature you select. The thermostat does that.
11/20/2018 7:52:47 AM • Irons • Answered on Nov 20, 2018
Not finding what you are looking for?
Generic Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Generic Irons Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39386 Answers

Are you a Generic Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...