Generic Irons - Page 9 - Recent Questions, Troubleshooting & Support
Love the euro pro but iron started to spark and cant seem to ooen it.
Ok, there is a short inside but the cord at the iron may be the problem. You need a CSA cord replacement if that is the case. Best idea is to scrap it in the blue box. If you are short of funds, try opening from the top and look at it as a learning experience. Oh with the plug not in the wall.
3/16/2018 9:15:47 PM •
Irons
•
Answered
on Mar 16, 2018
Should the cable from the machine to iron get hot
Hi,
If the iron is a steam-iron with a steam tank in the base-unit, then steam is carried up the connecting pipe & it will get hot in normal use.
If you put water into the iron itself, then there is only an electric cable connecting the base & it should never, ever get hot. A little bit warm maybe, but never hot.
Best of luck.
3/9/2018 10:16:07 AM •
Irons
•
Answered
on Mar 09, 2018
Home Touch clothes Steamer! Won't turn on..
Steam is a tried and true sanitize. And unlike some abrasive cleaners, steam is both penetrating and gentle at the same time. It effectively sanitizes because it can reach high temperatures (above the boiling point of water) in pressurized atmospheres. And, by effectively re hydrating and breaking the bonds of muck and dirt, it's highly effective at spot-cleaning and deodorizing without all that rough treatment. And irons, of course, use steam to work the wrinkles out of fabrics when dryers don't cut it.
2/26/2018 5:14:37 AM •
Irons
•
Answered
on Feb 26, 2018
All the lights on iron won't stop flashing.
It sounds as though it is blocked up with lime scale which won't allow the sensors to work so stopping all the functions....
I hope this helps....
2/25/2018 11:30:05 PM •
Irons
•
Answered
on Feb 25, 2018
Not finding what you are looking for?