Gestetner Office Equipment & Supplies - Page 2 - Recent Questions, Troubleshooting & Support

0helpful

1answer

Error code E-01 for gestetner dx 2430 - copy printer

Description. Cutter error The cutter HP sensor does not turn on within 3.0 seconds after the cutter motor turns on .

Read full answer

4/15/2019 10:32:48 AM • Gestetner Office... • Answered on Apr 15, 2019

0helpful

1answer

How to fix e-12 problem

Your master cutter is jammed clean the Master cutter

Read full answer

4/14/2019 9:00:11 AM • Gestetner Office... • Answered on Apr 14, 2019

0helpful

1answer

Gestetner DX 4542 not supplying ink

Ink pump motor may be not working first you need check your cp is original.. After that remove drum unit disabled the unit and clean ink detection sensor and ink pump motor

Read full answer

4/14/2019 8:58:08 AM • Gestetner Office... • Answered on Apr 14, 2019

0helpful

1answer

Am having a problem with my gestetner 5308b eror e o2

E02 Paper Table Drive Failure.The paper height sensor or the table lower limit sensor does not turn on within 7 seconds after the table drive motor turns on. point to check- Paper table drive motor Paper height sensor or table lower limit sensor. Mechanical interference with the paper table drive

Read full answer

3/10/2019 3:02:42 PM • Gestetner Office... • Answered on Mar 10, 2019

0helpful

1answer

Gestetner 5308 error code E-24

SC code:E-21 Paper exit timing sensor remains off E-22 2nd feed timing sensor remains off E-23 Master eject position sensor remains E-24 Feed start timing sensor remains off point to check- Feed start timing sensor dirty sensor or failed, air line to get dust off my first step.

Read full answer

3/10/2019 2:57:53 PM • Gestetner Office... • Answered on Mar 10, 2019

0answers

Error Sc 509 for copy printer Cp 6346 How can i fix it??

Read full answer

Be the first to answer 12/19/2018 7:02:50 PM • Gestetner Office... • Posted on Dec 19, 2018 • Be the first to answer

0answers

MY GESTETNER PRINTER SHOWS ME 838 2701 0XFFFFFFFF ERROR CODE CAN IT BE FIX AND HOW TANKS

Read full answer

Be the first to answer 12/6/2018 4:38:22 PM • Gestetner Office... • Posted on Dec 06, 2018 • Be the first to answer

0answers

Sorry ... How to reaset gestetner cp6123 duplicator E-14 error

Read full answer

Be the first to answer 10/11/2018 4:44:05 AM • Gestetner Office... • Posted on Oct 11, 2018 • Be the first to answer

0helpful

1answer

E-01 is displayed on gestetner 6123cp. what am i supposed to do?

Please check out below link for solution http://www.wic.support/?p=207 01 Error Code on Epson printer LCD tips to fix WIC Reset Utility Reset the...

Read full answer

8/4/2018 10:21:13 AM • Gestetner Office... • Answered on Aug 04, 2018

0helpful

1answer

My problem is my photocopy is not working it says

Hi the error code 560 is for the BCU which is a control board for the machine it is not getting a signal from this unit...try this ...press the yellow clear button then enter 107 then hold down the stop/cancel button till the screen changes select copier sp then 5.mode use the arrows to select 810 sc reset execute this and turn machine off .. wait a few then turn back on, if the error was a slight missread it should work away but if the error comes back you may have to remove the back panel and check the connections mayb replace the board.. good luck A.

Read full answer

7/31/2018 4:50:19 PM • Gestetner DSc338... • Answered on Jul 31, 2018

0helpful

1answer