Gestetner Office Equipment & Supplies - Page 7 - Recent Questions, Troubleshooting & Support

Refer Troubleshooting guide in user manual for error code listing explanation and revert back here i can help

SC350:
Problem:
ID sensor pattern test error

Description:
One of the following ID sensor output voltages was detected twice consecutively when checking the ID sensor pattern.
1) Vsp ? 2.5V
2) Vsg ? 2.5V
3) Vsp = 0V
4) Vsg = 0V

Possible Problems:
• ID sensor defective
• ID sensor connector defective
• Poor ID sensor connector connection
• I/O board (IOB) defective
• High voltage supply board defective
• ID sensor dirty
• Defect at ID sensor pattern writing area of the drum

** Generally, I've found this problem to almost always be one of the last two items listed above.

CODE ERREUR E06 DU DX 2430

You should be able to download a free online manual if you go to this site: http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&ved=0CCgQFjAC&url=http%3A%2F%2Fg.bowlily.com%2Fgestetner-6123cp-service-manual.pdf&ei=4BNQVcj7OonIsAXA9oDQDg&usg=AFQjCNGYP1c6PAVnfPLw7SC6FzayYEHlHA

Error code SC 364 is Hard Disk problem.

open the white cap on the toner bottle and instal again if it repets open the fruntdoor and close it repeatedly other wise call tech person -thanks

SC542 is themister error . change the themister in the fuser.

No Owner's manual? Try: http://www.manualslib.com/

Go to Ricoh Down loads on google and you will see the page for all units there. make sure you selct the correct one for 32/64 bit depending on OS for computer.

Yellow 182806 clear/stop is the new code for color units. Ricoh changed it last year. You can reset it in sp mode 5 back to old if needed.

dsm 745 has more modification than1045 more comfortable less disputes little problem. technicians can see this difference there are more details but i expressed that dsm 745 is recently than 1045 good luck

Plz change the developer machine working fine