Haier Dishwashers - Recent Questions, Troubleshooting & Support
Haier dishwasher XIB6B2S3FS-80 cycle not ending
First thing to try is a reset..
Unplug or turn it off at the breaker for 5 minutes.
You can also try this but it's used to clear error codes....
Simultaneously press and hold Cycle Select and Start pads for 5 seconds.
Press ANY button to complete the reset process. ...
The unit will now be ready to use/function normally at this time.
4/11/2023 2:43:19 PM •
Haier...
•
Answered
on Apr 11, 2023
My Haier DW12 dish washer does not switch on?
If your Haier DW12 dishwasher is not switching on, here are some steps you can take to troubleshoot the issue:
- Check the power source: Make sure that the dishwasher is properly plugged into a functioning power outlet. You can test the outlet by plugging in another device to see if it works.
- Check the circuit breaker: Check the circuit breaker for the room where the dishwasher is located. If the circuit breaker has tripped, reset it and try turning on the dishwasher again.
- Check the door latch: Ensure that the dishwasher door is fully closed and the latch is properly engaged. The dishwasher will not turn on if the door is not securely closed.
- Check the control panel: Inspect the control panel for any damage or signs of wear. If the buttons or display are not working, it may be a problem with the control panel.
- Check the fuse: Check the fuse in the dishwasher's power cord. If the fuse is blown, replace it and try turning on the dishwasher again.
- Professional repair: If none of the above steps work, it may be a more serious problem that requires professional repair. It is recommended to contact Haier customer support or a professional repair technician for assistance.
It is important to take caution when attempting to troubleshoot or repair a dishwasher, as these appliances can be dangerous if not handled properly. If you are not confident in your ability to perform repairs, it is best to seek the assistance of a professional.
Haier appliances repair parts search
With 30,000 9.4 out 10 reviews, they must be good!
It won't be the element though, it will the thermistor or the thermostat that is failing. Some can be calibrated. It may also be a failed circulation fan on a fan assisted oven.
Test the oven first with an oven thermometer. elements can be tested for resistance, but in my experience they work or they don't, they don't half work.
https://fixpart.de/de/uber-uns
..
3/11/2023 7:33:05 PM •
Haier...
•
Answered
on Mar 11, 2023
Haier dw9-tfe3 series dishwasher fault
Hi
I got the E6 error at the end of cycle and inside it was exceptionally hot and dry, no leak under DW,
I put breaker off and error was persistent, it finally disappeared after a moment, I guess after temperature went down.
If it happens again I'll update the topic.
7/15/2022 1:49:00 PM •
Haier...
•
Answered
on Jul 15, 2022
Haier sdw4a
hi
cant help more then this:
try the manual in the end of the page
see if it helps
http://www.haier.com/servicesupport/manualMore.asp
if not contact the firm
http://contact.haier.com/engdefault.asp
if they dont help
call a tech guy he'll know whats worng
good luck
Our Haier HDC1804TW counter-top dishwasher
Since mine does the very same thing, it's my guess that is the sterilising cycle as by this point it has already washed, done a short fill to remove any remaining detergent, and two rinses. I'm also assuming the second short fill is just to cover the heating element and/or to to generate an amount of steam having being heated by the element (I'm basing that assumption on the heat of the dishes at the end of end of the cycle and the heat of the water when it drains)
The washer keeps beeping and
I have a Haier HDP18PA with the same problem... I tried tilting mine backwards while running...this made a mess BUT the beeping stopped BUT the lights were still flashing. Turned it off and started it again and the lights still were flashing BUT no beeping. Decided to try tilting it forward while running ... made another mess BUT the lights stopped flashing. Turned it off again and restarted it and it is now running fine. Good luck!
Not finding what you are looking for?