Haier Freezers - Recent Questions, Troubleshooting & Support

you search on net.

5 Most Common Freezer Problems and Solutions

https://www.searshomeservices.com > blog > 5-most-common-freezer-prob...

#1 PROBLEM: My freezer is making strange noises. ... Keep in mind, though, that not all freezers will make exactly the same sound when this ... If everything is working, then the noise is probably just the appliance going ... Frost forming around the freezer door's gaskets indicates the door was not fully closed. .... Sign me up ... Missing: 5.3 ‎cu ‎ft ‎HNCM053E

You can try resetting it by unplugging it for 10 minutes.

The Ed error code is referring to the defrost heating system.

probably a fault in that switch

https://www.haierappliances.com/support/freezers try this web site and contact the manufacturer directly. They also have manuals. just surf their site.

https://www.haierappliances.com/support/freezers/troubleshooting try this web site for direct answers from the manufacturer.

https://www.haierappliances.com/support try this site to ask you question directly to the manufacturer.

If compressor isn’t running, it’s either a thermostat / control board problem, or a power supply problem.

If compressor isn’t running, it’s probably a thermostat problem

https://www.manualslib.com/brand/haier/freezer.html Identify the model and free manuals online at the link shown. Haier Freezer manuals

http://www.manualsonline.com/ I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

You may have a refrigerant leak. First make sure the lid has not warped and leaving an air gap for heat to enter. That's really about all you can do without getting a tech. involved. I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

see if this link helps you out. how to get wedge drawer open Google Search

Looks like an 18cuft

On some small units such as this, the condenser coil is actually in the walls of the cooler. It is not that unusual for this type of construction. I have seen this in chest freezers and other such units. If the unit makes the desired temperature, I would watch it for a day or 2 before putting any product into it to ensure it is okay and so you don't loose any product.

I use this on a regular basis and have had no issues. I believe it will work. If I had some numbers from the compressor plus a brand name such as Copeland, Tecumsah, embraco, etc., I may be able to tell you more about the compressor HP.