Hobart Food Mixers - Page 5 - Recent Questions, Troubleshooting & Support

Try a Commercial Kitchen equipment repairer or supplier. They may have what you are chasing.

Hi,im a hobart tech and know all these mixers well.What kind of mixer are you looking to write about?The differences are the sizes of bowls as 20qt,30qt,40qt,60,qt,80qt,140qt.Pick a mixer and i will write YOUR paper,but i want a fixya rating in return.

Parts manual http://www.hobart.co.kr/data_file/3A200Q595.pdf owners manual https://www.manualslib.com/manual/1335037/Hobart-A200.html#manual video below which may help https://www.youtube.com/watch?v=ceQE8PEYPPI https://www.youtube.com/watch?v=XaeWrSEmP9I https://www.youtube.com/watch?v=CkLWY9aKLdY https://www.youtube.com/watch?v=CkLWY9aKLdY

FROM FIXYA "Just give Hobart a call, and they should be able to help you (if you're in warranty, sometimes even for free!). Their phone number (according to their website, www.hobartcorp.com ) is 1-888-4HOBART (1-888-446-2278) "------

https://www.webstaurantstore.com/999/food-grade-lubricants-and-food-safe-lubricants.html?vendor=Hobart

https://www.webstaurantstore.com/999/food-grade-lubricants-and-food-safe-lubricants.html?vendor=Hobart https://www.webstaurantstore.com/999/food-grade-lubricants-and-food-safe-lubricants.html?vendor=Hobart

You can use a heavy weight gear oil or call the local hobart branch for it.To remove oil----Look under the mixer where the beater shaft is in the back and you will see a three quarter inch nut,remove this nut and drain the oil then put nut back in.To fill the unit remove the top cover screws and remove the top,you will see a long hexagon nut in length,remove this and grab a funnel then add the oil---be patient it takes time to fill as the oil is heavy.

Can you locate the motor?

See parts manual at link below. It doesn't show exactly where the cap is mounted but you should be able to follow leads from the motor to capacitor.

https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.hobart.co.kr/data_file/3D300Q794.pdf&ved=2ahUKEwjS282GguvfAhUL4YMKHctCDJ8QFjABegQIAxAB&usg=AOvVaw1jczTOGy4VQ3CtATMnJEQZ

try googling that.

You have lost 1st gear. The gearbox will require dismantling and replacement of the 1st gear part (diving key) if they are still avaliable. I wouldrecommend contacting yout local hobart call center and speaking to their technical team about the age and probability of parts

There is a small diving key in the gearbox that has most likely snapped. If this is an old model a200 then this part may not be avaliable any more. You would need to contact your local hobart service center to find out if the parts are avaliable still. These are fantastic machine that will work forever and a year, they certainly don't build them like those anymore

I took mine apart completely and reassembled everything and greased everything and mine is doing the same thing. I'm thinking, also, that it is the tightening of the top lock nut.

Try www.partstown.com or www.heritageparts.com

After the pin is removed, place a flat-blade screw driver at opposite sides of the planetary in the small gap between it and the housing. Gently pry off the planetary.

Shell Darina 2 grease, is now called Shell Gadus S2 U1000 https://www.mil-specproducts.com/Documents/1525_gadus_s2_u1000_2.pdf

there are two oils to change. one for the trans. and one for the planetary.the drain plug for the trans. oil should be in back of the planetary take out plug let oil drain ,remove top cover take outstand off where front screw to top cover threads into put new oil in there till you hit line in sight glass on right side of mixer.

what ever the grease is used it must be food grade grease even though the mixer is old, the grease and oils will still be the same and may even be better than original specs what is more important is the replacement of the shaft seals to prevent lubricant leakage

http://hvac-talk.com/vbb/showthread.php?1999961-Hobart-hl200-alarm-codes Thread Hobart hl200 alarm codes

Hello & Welcome to FixYa

Please get back to me with a detailed question about your Hobart as the question is still unclear because trouble code is not written.

Kevin

The switch first then the motor.