HP LaserJet - Answered Questions & Fixed Issues

Follow these steps to remove previous HP drivers, and then install the new driver.Step one: Remove previous HP drivers Follow these steps to remove the current drivers.

1. Disconnect the USB cable from the HP product, if it is connected.
2. Click the Windows icon ( ), and then click Devices and printers .
3. Find the printer icon ( ) representing your HP product, right-click it, and then click Remove device .
4. Follow the on-screen instructions to remove the driver.
5. Repeat these steps to delete multiple instances of the same printer icon, and also for any fax icons for the product.
6. Reboot your computer.

When your new operating system is up and running, simply connect the USB cable from the computer to the back of the HP product, and then press the Power button ( ) to turn it on.
Windows 7 detects the hardware and automatically installs the correct driver. A notification lets you know when installation begins and when it is complete. You do not have to download any software or insert the product CD.

Just do a Power Reset as recommended herehttps://www.google.com/search?q=hp+laserjet+425dn+57+fan+errorVideohttps://www.youtube.com/watch?v=EiB4DH0tHrg..

I am facing the same problem it is showing "INVAL NVRAM SIZE 1/6" then again it shows "INVAL JDI" ON hp Printer P3005dn

If the device does not work after turning on the printer, it is due to power failure But if the device rotates, either the laser is faulty or the fusing thermostat is broken.

Question edited for clarity and toss in a load of CAPS. Question moved from 'Jet Office Equipment' category. It's not good!

HP Color LaserJet Pro MFP M477

Printcopy.info https://printcopy.info > brand=HP > code=58 Code: 58.04; Display: 58.XX Error, Turn off then on; Description: The product has experienced an error with the low voltage power supply. Missing: M130fw. ‎' Show results with: M130fw.

58.04 printer display error on powerup

HP Support Community https://h30434.www3.hp.com > td-p Aug 2, 2018 - THE ERROR CODE PROBLEM OF MOTOR POWERSUPPLY BOARD (SMALL DAUGHTER BOARD TOP OF THE SCANNER UNIT), Transistor no of 905,903 like ..before you change check motor ... My printer is displaying, "58.04 Error power outage detected... Jun 28, 2022 Laserjet Pro 400 MFP 451dn error message 58.04 Aug 5, 2013 My laser jet MFP M477fdw printer is showing 58.04 error cont... Sep 22, 2021 HP M451 Error 58.04 - HP Support Community - 5830295 Nov 1, 2016 More results from h30434.www3.hp.com Missing: M130fw. ‎' Show results with: M130fw.

Error Codes > HP > LaserJet Pro MFP M130 > Code 58.XX

Printcopy.info https://printcopy.info > brand=HP > code=58 Code: 58.XX; Description: The product has experienced an error with the low voltage power supply. • 58.04 = Low voltage power supply malfunction; Remedy: 1. ..

Create a customized hyperlink to a document, file, or Web page-See this web page for help. Good luck! http://bit.ly/RU5uMO

Did you remove the sealing tape? 5. Remove the new print cartridge from its packaging, remove the orange cover from the print cartridge, and then pull the orange tab straight out to remove the sealing tape. 6. Squeeze the blue release levers on the print cartridge, holding it with the roller facing you. Lower the cartridge straight down into the carousel until it is firmly in place. 7. If you need to replace another cartridge, close the top cover and the scanner assembly, press ROTATE CAROUSEL, and then repeat steps 4 through 6. http://www.hp.com/ctg/Manual/c00292207.pdf Other ideas https://www.google.com/search?q=Hp+laserjet+2840-yellow+cartridge+flashing ..

Thank you for contacting FixYa with your printer Inquiry.
41.3 Unexpected Paper Size Explanation

• The printer detected a paper size different than what it was expecting.
• This is typically caused if two or more sheets stick together in the printer, or if the paper tray is not properly adjusted.

Recommended action

1. Reload the tray with the correct paper size.
2. Ensure that paper in the tray is loaded under the front and back tabs.
3. When printing from tray 1, verify that the correct paper size is selected in the control panel (see the Paper Handling Menu section in the User Guide ).
4. When printing from tray 2, 3, or 4, verify that the three paper size adjustments on the paper tray have been made correctly (see the description of adjustments in the section on Loading Trays 2, 3, and 4 in the User Guide ).
5. After performing the actions above, press GO. The page containing the error will automatically be reprinted if jam recovery is enabled. Or, press CANCEL JOB to clear the print job from the printer's memory.
   Hope this helps. Please keep us updated and remember to rate this answer.

Checkthe laser unit shutter

Go to this link, pull down to get to the WIN 8 OS that you have, and download the driver. HP LaserJet 3055 All in One Printer Drivers

Download the latest drivers from hp.
here is the link to your hp printer for windows 7
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1140780&prodTypeId=18972&prodSeriesId=1161389&swLang=8&taskId=135&swEnvOID=4062

1.replace the cartridge.
2. check PCB board contacts
3. replace PCB board

clean the drum of the toner with tissue paper and reinstall hopefully it will resolve the issue

I will say for me, i would rather uninstall then reinstall with the installation disk where during the installation process you will have options to select the functions you want to install.