Hunter Dryers - Recent Questions, Troubleshooting & Support
Hunter fan remote control 99600 not working
This must be a common problem, since I Googled the part number and it popped up before I completed the number. I am going to have to order a new remote, since I don't have a solder pen. Wish me luck.
11/22/2023 10:57:54 AM •
Hunter Dryers
•
Answered
on Nov 22, 2023
Hunter ceiling fan remote problem
You will most likely need to replace the receiver with a new one from hunter. The receiver is actually a complete controller and contains the receiver, relays (which you hear clicking) and starting condensors(large capacitors which hold a charge that is "dumped" over the windings to get the motor to start from a dead stop). These appear to be pretty tightly assembled unless you have a desire to start replacing parts "off the board."
Hunter ceiling fan (model no. 25736) and light not starting
Home Depot sells universal remote systems (transmitter and receiver) for around $30 (in Delaware & Pennsylvania) -- don't know price in Chicago).
I'd just replace it. Hunter may be correct that they are the only source for the receiver, but if you get a new transmitter as well, you don't need their receiver. The labor is the same either way.
Charlie
Dropped remote for hunter fan part 85095-01 lost a jumper. Can I buy just a jumper somewhere?
Talked to customer service. Thanks for the number. They so not make these remotes any more. But You do not need to buy a new jumper just remove the same jumper number from the ceiling fan. this is a very easy fix. Please do not buy a new seiling fan. You can even remove all the jumpers from the remote. Just make sure you remove all of them from both remote and ceiling fan.
Not finding what you are looking for?