Hunter Dryers - Page 8 - Recent Questions, Troubleshooting & Support

need to disconnect the power source to fan then test the transponder / relay in fan possible faulty and will probably need to be replaced

need to test power source -then power to unit -check wiring and connections --motor

Why don't you just put in the correct wattage?

fan wobble is not from balance but from uneven blade angle if one blade is bent higher than the others or if one blade is twisted more than the other wobble will result If you assembled the blades onto the fan motor make sure that the mounting points are not hung up on the body ridge next using a tape measure at one position measure the blade tips from the floor or ceiling and bend the other blades up or down until they are all the same distance Hold the tape steady and turn the fan by hand next at the same point measure the difference between the front and rear of a blade and make sure all of the others have the same measurement

Lowes and Home Depot sometime carry the globes on the shelf in my area. Not sure if available online through the internet or by phone. https://www.lowes.com/b/hunter-fans.html Text and phone contact information for Lowes. https://www.lowes.com/l/contact-us.html

https://www.elliottelectronicsupply.com/capacitors.html contact tem and ask them if they can help with capactitor.

Many Hunter fan manuals are available here: https://www.hunterfan.com/parts-manuals . I can't find a 20730-300. However, there is a manual for the 20730 ceiling fan. The direct link to the English version of the manual is currently https://s7d5.scene7.com/is/content/HunterFan/41343pdf . I suspect this manual will help since the 300 suffix specifies a color option. I hope it does help. Cindy Wells

Ebay