Hunter Dryers - Popular Questions, Answers, Tips & Manuals

Likely the capacitor pack is kaput but can be other. Tjese can be found on eBay or Amazon. Capacitors are model specific.

Be sure reverse switch is not mid position. Check for power at fan pull chain.

Hunter Dryers | 38 views | 0 helpful votes

i don't know. battery may be dead in remote or in wrong way. please check batteries. if all tests ok, consider another remote at <>

Hunter Dryers | 101 views | 0 helpful votes

Can be almost impossible to determine code without sighting receiver. Do you have old transmitter as the correct dip switch settings would be on this. One "trick" you can do if there are more than one remote fans installed is to check other controllers for their codes. generally when installers set dip switches for multiple fans in homes they move the No1 switch from 0 to 1 or vice versa, then the switch position for second fan is move switch 2 as previous. You may be lucky and "jag" the position otherwise you will need to get to receiver.

Hunter Dryers | 69 views | 0 helpful votes

If remote and receiver is rated for fan load then this should be possible. Will need to replace remote and sensor units as 3rd party remote may not be compatible with the Hunter type.

Hunter Dryers | 70 views | 1 helpful votes

Hunter would be a possible source.

Hunter Dryers | 102 views | 0 helpful votes


Hunter Dryers | 85 views | 0 helpful votes

Is there power at fan terminals? If not then fan controller faulty. If yes then internal wring faulty and replacement necessary as not a repairable item. Also check if active and neutral are available at fan. Also if remote check batteries in remote unit or could be faulty remote receiver

Hunter Dryers | 103 views | 0 helpful votes

Lowes has a universal replacement remote for the 99600 hunter. Lowe Home Improvement Appliances Tools Hardware Paint Flooring

Hunter Dryers | 70 views | 0 helpful votes

You can get a new remote from Home Depot or Lowes. you will need to wire in the replacement part. How to Install Hunter Control Receiver

Hunter Dryers | 60 views | 0 helpful votes

To help those on fixya to help you need to put out more info as there are many models of fan's if there's a model number you need to put it up with you're question. for now here is a fan motor that maybe what you need. Take apart you're fan and look at the motor for model tag's and look it up.
P.S. most small fan's are simple 3 corded motor's a (+) & (-) & (ground) so if it fit's and you know you're wiring you can make any motor work. just make check that the motor does not take to much current you may end up with a hot cord.


Hunter Dryers | 78 views | 0 helpful votes

Contact Hunter directly to request it.

Hunter Dryers | 60 views | 0 helpful votes

check power supply and motor

Hunter Dryers | 207 views | 0 helpful votes

Not finding what you are looking for?
Hunter Logo

2,512 questions posted

Ask a Question

Usually answered in minutes!

Top Hunter Dryers Experts

Joe Paxton

Level 1 Expert

9 Answers

Paul Bade

Level 3 Expert

1662 Answers


Level 3 Expert

85222 Answers

Are you a Hunter Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides