Hunter Dryers - Page 4 - Popular Questions, Answers, Tips & Manuals
How to convert a Hunter ceiling fan remote to hard wire switches
You cannot do this because the remote has a connection for reversing the direction of the blades. Hunter does not post the schematic for their fans. There is a common, low, medium, high and possibly the light and the reverse direction. IF you do manage to connect it, you will lose a lot of functionality.
7/15/2018 10:43:08 PM •
Hunter Dryers
•
970 views • 0 helpful votes
How To oil hunter fan catalog 22272-004. Can't find my 1980 owners manual which used to give instructions.
Checking OilCheck oil level immediately after fill- ing the reservoir. To check oil, bend an ordinary pipe cleaner into a 1/2" long hook and dip it into the oil reser- voir. If oil touches the end of the pipe cleaner, the fan has ample oil. If it does not touch, add SAE 10 non-detergent oil slowly until it touches the pipe cleaner.Your Original Hunter's unique lubricating systemThe bearings are submerged in a bath of oil. The oil moves up a spiral groove in the shaft, lubricating all bearing surfaces as the fan operates. This Lubrication System does not normally "use up" or require the addition of extra oil once the oil reservoir has been filled to the correct level. This unique lubrication system is one reason your Original Hunter Ceiling Fan will last a lifetime. It is highly unlikely that you will ever need to add oil to your Original fan once it is installed. Should you move your fan to another location, it is a good idea to check the oil reservoir. Hunter has developed an accessory 'Original Relocation Kit' that includes all mounting hardware and a fresh tube of oil for this reason. The model number is 22360.CAUTION: DO NOT TURN FAN ON UNTIL LUBRICATION HAS BEEN ADDED. TO OPERATE THE FAN WITHOUT OIL OR WITH LOW OIL WILL VOID YOUR WARRANTY Adding oilYour fan has been shipped withoutoil in the motor. A 1-ounce tube ofhigh grade SAE 10 non-detergent oilis packaged in the sack parts. All theoil in the tube must be put into thefan. Cut the tip off the tube and place the tube into the oil hole. To avoid overflowing during filling, allow oil to gravity flow about one minute to fill the oil reservoir. (It may be necessary to puncture the tube to allow air in.)
3/26/2018 10:39:11 PM •
Hunter Dryers
•
642 views • 0 helpful votes
Not finding what you are looking for?