JVC LT - Recent Questions, Troubleshooting & Support


Try calling the service center for technical help at these numbers
Check the status of a repair at any of the locations below.


bullet01.gif California Factory Service Center space.gif space.gif JVC Factory Service Center map_it_btn.gif space.gif 5665 Corporate Avenue
Cypress, CA 90630
(800) 252-5722


bullet01.gif Georgia Factory Service Center space.gif space.gif JVC Factory Service Center map_it_btn.gif space.gif 1500 Lakes Parkway
Lawrenceville, GA 30043
(800) 252-5722

This was all the Jvc.com website had to offer for customer service on the website. Hope this helps you with your problem.

JVC LT-42X788 42... | Answered on Aug 25, 2019


utencilio posted this fix. It worked for my JVC LT-42X579.

Okay, I found a fix! Called JVC, spoke to somebody there, here it is:
1)unplug the TV completely, no wall no power strips, completely
2)wait 10 sec
3)plug TV back in and Turn it on, the light will still be doing the same thing
4)wait 30 sec
5)ON THE TV, not the remote, locate the menu, volume (-) and power button.
6)while simultaneously holding down the menu and volume (-) button, pressed the power button ONCE and continue to hold the other 2 for 10 sec.
7)on the remote control, go to menu>settings>system info
*** now this I know as a FACT will work on systems that display: JVC - ver.5.32FO001, but I don't know of any other versions***
8)press the mute button on the remote twice
9)unplugg TV again and wait 10 sec.
10) plug TV in and turn on

It SHOULD be working normally now... Thanx to the guys a JVC support for this one, I know it seems like an obvious first place to look, but sometimes it isn't. I for one checked online forums first

JVC LT-42X579 42... | Answered on Jul 08, 2019


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

JVC LT-42X579 42... | Answered on Jun 12, 2019


Please my jvc television couldnt change to stellite channel when i was offing it mistakenly pressss the +button i have been trying to change channels but i couldnt please is there any solution to that?please i need urgent help
12_9_2018_12_57_37_am.jpeg

JVC LT-32E479... | Answered on Dec 09, 2018


you tube might have blown ouy that's a big problem.Next time make sure you plug your TV in a surcharge protector

JVC LT-37X898 37... | Answered on Jul 17, 2018


Sounds like a panel issue, you may need a new TV

JVC LT-37X688 37... | Answered on Mar 08, 2018


Hi.

To start, this TV should not require service remote to access service menu or adjustment menu.

In service menu also there is not a single reset option, but the technician must set the values one at the time.

About the part purchased, I could not find any JVC 87274RS remote control. Please check the number, include any dash or spaces, and include any info you have on the part, so that we can spread light on this.

About the problem it does not sound like something that "just need a reset" it looks like HDMI port is defective, and you should be entitled to get a technician at home if the unit is still in warranty (check it out).

Here how to get in service mode. You use the standard remote. Do not change values in service mode or you can damage the TV:

ginko_66.gif

I uploaded here a service manual for the 40'' of same chassis.I do not have the 42''. Service mode, most parts and functions are the same. Panel size and frame are different.

Regards.

Ginko.

JVC LT-42X688 42... | Answered on Feb 22, 2018


What happens to the image? If you wish to get some details; visit the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/

JVC LT47X579 47... | Answered on Feb 20, 2018


I am guessing the CCFL tube is starting to burn out. Replacing is not impossible but somewhat delicate process.

Since the TV is that old i would recommend you to buy new TV instead when it goes completely dead.

JVC LT-37X688 37... | Answered on Feb 07, 2018


Return it to your place of purchase and get something else anything else you wouldn't believe how many people are having Issues with the LT series get rid of it.

JVC LT Televison... | Answered on Jan 04, 2018


you didn't say what kind of antenna you have attached to the TV. The antenna is very important and the type of antenna you need is based on where you are in relationship to the television stations in your area. Even being down a hill In the area can be a problem for antenna television. I had to put an antenna in my attic because an in-door antenna could not pick up the signals for the TV stations in my area, I am down a hill.

JVC LT-32E478 TV | Answered on Jan 04, 2018


sounds like the remote batteries could be bad or the buttons on the remote need to be cleaned. some JVC TV remotes, I'm not familiar with this particular one though, can be cleaned using a clean pencil eraser. Be careful opening the remote because some parts can fall out or you can damage the connections to the LED emitter that sends the signal to the TV. Also the solder connections on that LED could be bad.

JVC LT-32X575 32... | Answered on Jan 04, 2018


sounds to me like the fluorescent backlighting is going bad in the top half of your set.

JVC LT-32X576 32... | Answered on Jan 04, 2018


TV repair shop

JVC LT-17X475 17... | Answered on Jan 04, 2018


Sounds to me like the digital pixeling that occurs with a weak signal. You have not identified whether this happens on broadcast/antenna TV, cable or satellite service, or a video input such as a DVD. This can be a common problem if you have a weak signal on any of those inputs. In any case, blowing out the dust will not help.

JVC LT-42X688 46... | Answered on Jan 04, 2018


There is not enough information in this description to even start addressing a problem, there are so many things that can be at issue.

JVC LT-40FH97 40... | Answered on Jan 04, 2018


If your set is led or lcd your Tcon board is getting to the end of its life, its the lowest cost board in a TV

JVC LT-32P679 32... | Answered on Dec 01, 2017

Not finding what you are looking for?

-593 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

JVC Televison & Video

  • Forum

View Most Popular

  • JVC Televison & Video
Loading...