I don't know, but I would assume it is an AC solenoid so it does not matter. If the wires are the same color, that would be a safe bet. If they are different colors, you may need more research. NORMALLY, there is a schematic inside the unit, for technician use only. Go for it.

Kenmore Washing... | Answered on Nov 07, 2019

1 Answer

No power to washer Kenmore

Check the washer outlet by plugging in a lamp if the is power at the washer turn the dial to different setting and see if it turns on. Make sure the lid or door is closed

Kenmore Washing... | Answered on Nov 03, 2019

0 Answers

How to get kenmore washer 796.31523210 into diagnostic mode

Kenmore Washing... | Posted on Oct 31, 2019 | Be the first to answer

1 Answer

My kenmore he washer model 110.26002012 will not go past sensing mode

Possibly a cycle timer problem

Kenmore Washing... | Answered on Oct 28, 2019

1 Answer

My kenmore he 110.26002012 says its sensing but keeps filling a little then draining over and over will not go to next cycle, wash just sounds like its leveling and filling then agitates a second then drains...

The cycle timer could be at fault.

Kenmore Washing... | Answered on Oct 28, 2019

2 Answers

KENMORE 90 SERIES TOP LOAD WASHER WONT SPIN LOUD

does it agitate???. if it does not then you need the motor coupling. you need to remove the cabinet, yes, I said the cabinet, remove the pump,motor and you got to the coupling. replace all part in kit. reassemble and test. go to the website of sears parts WITH THE COMPLETE MODEL. and get the part. model starts like 110.xxxxxxxxxxx

good luck to you.

Kenmore... | Answered on Oct 27, 2019

0 Answers

My Kenmore Elite washing machine, model 31512211, begins to will with water but then immediately begins to pump out the water. An IE error code appears. Thanks.

Kenmore Washing... | Posted on Oct 23, 2019 | Be the first to answer

1 Answer

Bottom right corner from underneath leaks water, small drops. this is on the kenmore 500 washing machine

your outer drum probably has rusted thru .

Kenmore Washing... | Answered on Oct 23, 2019

Not finding what you are looking for?

Family Lines

30,985 questions posted

Ask a Question

Usually answered in minutes!

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

Kenmore Washing Machines - Recent Questions, Troubleshooting & Support

Kenmore 665.13793k601 won't finish a cycle

Kenmore 80 series washing machine (model series 27841, according to sticker on the top of it) Filled, but is not agitating, spinning, or draining. Timer is running normal, but nothing happens.

The spin speed & water temp buttons won't change the selection on my Kenmore HE2 Plus washer?

Kenmore washing machine the light keeps blinking on door lock

Kenmore top lad washer, Mod 110.28032701. Water dripping from Rotor(covering drive motor) during wash cycle.

I HAVE A KENMORE WASHING MACHINE WITH A LOCKING LID WHEN IT FINALLY STARTS ITS ADJETATING ITS AS IF HARDLY ANY POWER,WEAK

What is the capacity of Kenmore 970-C42072? wanting to compare to new models

How to Manuel unlock top series 100 he kenmore washing machine

Kenmore Washer 796 will shut down after wash. Need to unplug and plug back in before starting a new load?

Kenmore HE2 Plus Front Load Washer "quiet pak 2- Won't start and won't unlock door sometimes flash's f-28

Have 417 series Kenmore stackable washer. Part of bed sheet got stuck/caught inside groove at bottom of wash tub. (Inside tub, not outside tub.) Tub was not overloaded. How to avoid in future?

Just a simple Question about the Skin Care rinse

I have a kenmore 91147602 that i need to find out how to hook up the wires to the door lock mechanism

No power to washer Kenmore

How to get kenmore washer 796.31523210 into diagnostic mode

My kenmore he washer model 110.26002012 will not go past sensing mode

My kenmore he 110.26002012 says its sensing but keeps filling a little then draining over and over will not go to next cycle, wash just sounds like its leveling and filling then agitates a second then drains...

KENMORE 90 SERIES TOP LOAD WASHER WONT SPIN LOUD

My Kenmore Elite washing machine, model 31512211, begins to will with water but then immediately begins to pump out the water. An IE error code appears. Thanks.

Bottom right corner from underneath leaks water, small drops. this is on the kenmore 500 washing machine

Not finding what you are looking for?

Family Lines

Ask a Question

Popular Products

Kenmore Elite 45986 Front Load Washer

Kenmore 24032\24036 Top Load Washer

Kenmore HE2 Plus Front Load Washer

Kenmore 22422 Top Load Washer

Kenmore Elite Oasis 27052 Top Load Washer

Top Kenmore Washing Machines Experts

fordexpert

Harvey Mahal

Kristen Denison

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

7C438E5.pdf. user-manual-HE2 Plus 3.6...

L0502228.pdf second washer...

L0606291.pdf. user-manual-Elite Oasis...