Kodak EasyShare - Recent Questions, Troubleshooting & Support - Page 2

Once the date has been stamped on the photo, it's there just like the subject's face or the overflowing trashcan in the background or whatever. You can edit the photo somewhat using a photo editing program, using the same process as deleting any other object in your photo.

hi,May be your mov file is corrupted; to repair it back, just use file repair software. Few days before, i was also suffering from the same problem. This tool has helped me to repair mov file and i got all my precious videos back. Try this, it will surely give you positive result.

Try gently lifting the flash with the flash latch held open. It may have grit stopping it or a broken spring. Also make sure the latch is pulling right across to the right.

https://www.youtube.com/watch?v=vgPvv9mhMNs

Hi there please follow the steps and let me know the result.
1. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.
2. Look carefully between the lens and the camera body for any sand, dirt or any damaged etc.
3. Try turning the camera with the lens facing down and shake to dislodge anything stuck
4. Try removing batteries and memory card, wait 5 minutes and refit the battery only.
5. Now turn on camera( with out card ) and see ,if working then fix the memory card & again turn on the camera. If working then fine . Otherwise format the memory card and fix back in camera again & try. Make sure before format the memory card take a back up all photos in your computer then format. If no luck then reset or restore the camera setting by pressing Menu key for 2 sec .. in not done the press both Menu & self time key for 2 - 4 sec.
i hope it will gives you success. Thanks & Before you leave, if you have found my information helpful and if you haven't already done so then please press the ACCEPT button, this is how I am paid for helping you today. POSITIVE feedback & bonus is appreciated

check the battery where you insert on camera kodak has an error on mine <+> should be where the <-> is and<-> should be where the<+> is

You've got to clean the battry contacts with a, dampened in rubbing alcohol, Q-Tip Do the same to the battery and the charging station.

https://www.manualslib.com/manual/723739/Kodak-Easyshare-C140.html?page=1#manual

What u need is a video converter.
Try Pavtube Video Converter(http://www.pavtube.com/video_converter/)
It can convert mov to avi without quality loss.
easy to use, reasonable conversion speed.

carry a lot of spare batteries

Have a look in the manual, but I suspect not - that port is probably for data transfer, not power or charging battery.

You can recover deleted photos from camera with this1. Do not take any new photos into your camera.2. Connect it with computer.3. Download photo recovery software, recommend one is Tenorshare Photo Recovery (simply because i was using it and it worked)Photo Recovery on Windows ComputerPhoto Recovery on Mac Computer4. Install and open the program, select your memory drive, and click 'Start' button to start scanning process which will find your deleted photos.

after reading the last comment that the guys cat knocked it off the table and he suggested throwing it on the ground it worked...

Drivers are at kodak.
http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=7551/7552&product=EKN031331

After downloading any pics from the card using a card reader if necessary, go ahead and format it in the camera.

You can view one online and/or download a PDF version from
http://www.kodak.com/global/en/service/products/ekn031109.jhtml?pq-path=3905/6839/7477

It uses a USB to USB 2.0 Mini Type B 5 Position cord. Here is one just for that model: http://www.amazon.com/Kodak-Easyshare-C315-USB-Cable/dp/B00940EVD4

how to fix lens errors just watch the video.

If you have not yet, try selecting a language.

You may need to do a hard reset. Turn your camera off, then remove the battery and media. Then try to power it on with the battery out and hold the power on for about 15 seconds. Then place the battery and the media back in and power on. The language menu should not be stuck anymore.

If this doesn't work please comment and we can try another solution!

Cheers!

Feedback is appreciated!

I am wondering if your PC is saying this if it is you need to download a program that reconises .MOV files and that would be apple quicktime and it can be downloaded free of charge at www.apple.com click on donwloads the select quicktime.

Wow I sure hope this helps please leave me feedback if your still having this issue. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620