Kodak EasyShare - Popular Questions, Answers, Tips & Manuals

It should pull straight out. Try lifting front of tray slightly when pulling it out. copy and paste https://www.manualslib.com/manual/288083/Kodak-Easyshare-Photo-Printer-500.html?page=11#manual

EVER ASK KODAK TO ASSIST YOU ?

Try to factory reset the printer

Probably a piece of the old one is obstring it.

It’s making te noise of printing or just get the paper and got it out fast ? If goes straight out is the driver if goes line by line and is blank the cartridges are dryed or the injector are clogged with old ink. Time to buy a new one or send it to maintenance

What is the model number of your Kodak printer?

Can you copy directly from camera to your USB-connected PC? Or if the camera uses an SD card, use the card as a drive in a card-reader. Then try to upload using Picasa. Otherwise see if Kodak HS has user-options to bypass this. Or contact Kodak.

Software issue. Try a hard reset of printer or uninstall and reinstall the software of unit. in computer that is affected. And if you continue to have issues with it contact the Kodak experts directly on their web site.

Printer software will have a menu for cleaning the heads when they get dirty or clogged. Try that. You can also , if possible, remove the print head and soak it for a few hours in cleaning solution.

Hello! Please check the manual to this device. Hope it will help you! https://manualsbrain.com/en/manuals/1863206

problem is likely to be the print head, the ink can dry up inside the print head and block fresh ink from flowing. you can get print head cleaning solution from ebay, which sometimes works, or else go here to get your replacement print head www.kodak.com/gb/en/consumer/products/printing-supplies/printhead.../default.htm the one i have is a clip in clip out part

Disconnect your printer from the power source. Wait 20 or so minutes and then re-connect. See if there is an error message on your printer. How old is the printer? Clean the place where you install the sd card with 70% rubbing alcohol.

Consult the Kodak company or Go to a nearby gadget technicians. I hope it could help you....

Yes the cartridges of all newer printers have chip that indicates the cart ink level, when the cart is empty the chip self destructs.

did you use the reset menu?

sounds like its only receiving half the data. try these step... uninstall printer from your device... reinstall printer to device... if youre using a smartphone or tablet, switch to a pc... press and hold the cancel button on the printer... turn it off for 60 seconds then power it... run the nozzle cleaner function, then try again

Kodak probably.

the beautiful thing about printer is that the software is preloaded in the hardware itself . simply meaning all you have to do is plug in your printer straight into the usb port of your computer. while the printer is on when that happens the computer will download the necessary driver to make sure the printer is functional! then you will also see a pop up to download their software . in that software is your salvation, for there while be a step by step tutorial on how to successfully install your new printer. Kodakcustomer service is great if you catch a hiccup just be sure to contact them and i believe they will walk you through the process. here is a bing search to get you in the right direction! http://www.bing.com/search?q=kocak+printer+technical+support&form=U280DF&pc=U280

To me it sounds like the rollers are shiney so may need cleaning