Konica Minolta bizhub - Recent Questions, Troubleshooting & Support - Page 2

replace the magenta image unit

Replaced. Or it could be the main board.

What is the model number?

Would help to know the model of the machine

Replace the transfer belt.

NO such code for that machine Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Image unit motor failure. Replace the image unit. Or the gear pack for the motor or the Motor worse case its the main control board.

Remove the paper behind the paper draws

2.6.19 C0096: Image Transfer Belt pressure/retraction failure
2.6.20 C0098: Fusing Pressure Roller pressure/retraction failure
Relevant Electrical Parts
1st Image Transfer Retraction Position Sensor (PC12)
1st Image Transfer Pressure/Retraction Motor (M11)
Control Board (PWB-MC)
Step Action
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1
Check the M11 connector for proper connection
and correct as necessary.
— —
2 PC12 I/O check PWB-MC PJ3MC-6B (ON) 6-B
3
M11 operation check PWB-MC PJ5MC-1~4
(Pulse Output)
6-C
4 Change PWB-MC

Konica Minolta Bizhub C266 MFP PCL6 Driver 7.2.0.0 so what PC is it.? non told what OS on PC windows 7 to 11? connected via USB?????? that means the PC driver is bad, wrong or missing In what country are you. the UK drivers are at makers sites, but sites are by country so... why not ask maker for direct support and not use virus infected drives I see google finding endless now. direct from them on there specific website for your COUNTRY UK https://www.konicaminolta.co.uk/en-gb/support/customer-support

get it serviced (call) or RTM< the RTM read the service manual end.

Question edited for spelling and full 'make model (what it is)'. Please don't type in all CAPS, it is considered SHOUTING and is hard to read. Question moved from Cellphones category. Check out the videos https://www.google.com/search?q=KONICA+MINOLTA+c360+disable+drawer+2 ..

Okay. That is a KM code. I need more detail to answer your question. for instance, model #, and why do you feel you need to get into service mode? If you don't know where you are going and why you are going there, there is plenty of buttons and bits that can cause further issues with your machine.

Edit in 'MAKE MODEL (what is is)' so we don't have to guess. In all such issues do a power reset. Pull the mains plug from the wall, wait 5 minutes and try again.

Try Reset, or call for service. https://www.google.com/search?q=Bizhub+951+reset ..

Check the link https://www.google.com/search?q=konica+minolta+bizhub+c224e+black+not+detected ..

Thread Bizhub 750 error code 2401 Maybe the link above will help. I found it by a google search, and unfortunately I am not familiar with that model.

Background Explain!!!!! Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Recommend a tech come out to determine. sound like a Transfer roller (Transfer of image to paper problem Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

C6757: CCD power-supply voltage malfunction Description: Power is not supplied to CCD after the lapse of a given period of time after the main power switch or power key is turned ON or the machine recovers from the sleep mode Check: • CCD board (CCDB) • Scanner drive board (SCDB) • DC power supply (DCPU)