Kyocera FS - Recent Questions, Troubleshooting & Support - Page 8


Call the kyocera service centre close to you and tell them the code. I can't find anything about this service code.
You can check yourself what the publish for your printer here:
Download Center

Kyocera... | Answered on Jan 05, 2015


Clear the print que. Sounds like you have a print job in the que that has a European paper size. Example A4. U.S.A. useS 8.5x11 or letter or letter (r)

Kyocera FS-920... | Answered on Jan 03, 2015


Under the QUICK PRINT tab, locate the DUPLEX icon. Click repeatedly to select between 'flip on short edge', 'flip on long edge', and 'OFF'.

Kyocera FS-2000D... | Answered on Dec 30, 2014




Broken heater lamp error

The temperature won't rise by 1°C/33.8 °F during warming up and the heater is turned on for 5 seconds.

The temperature won't rise by 1°C/33.8 °F during printing and the heater is turned on for 5 seconds with the duty cycle more than 60%.


1. Defective fuser thermistor.

2. Broken thermal cutout or heater lamp.

3. Defective engine/high voltage PWB.


Turn power switch off, and remove power cord.


Detach YC7 connector on the engine/high voltage PWB.


Measure resistance between pins 1 and 2 of the detached connector.


Open (infinite)?

Yes Then - Replace the fuser thermistor.

No Then - Detach YC1 connector on the power source PWB.

- Measure resistance between pins 1 and 2 of the detached connector.

Open (infinite)?


Yes - Replace the thermal cutout or heater lamp.


No - Replace the engine/high voltage PWB.


I hope this was helpful,
Shawn

Kyocera FS-1016... | Answered on Dec 28, 2014


thanks but where do i find the fuser of the kyocera in the printer

Kyocera FS1370DN... | Answered on Dec 15, 2014


yyou have to be careful when doing this.
the waste toner is built in to the process unit (drum unit) and has a plug on the side.
remove the plug and tip it out.

Kyocera... | Answered on Dec 11, 2014


It sounds like the fuser heater has failed.

Kyocera FS-920... | Answered on Dec 10, 2014


There are actually some certain meaning on the red light and green light showing different information to user. The summaries are:
1) Green On, Red Off = Printer Ready.
2) Green Fast-Flashing, Red Fast-Flashing = Printer warm up.
3) Green Fast-Flashing, Red Off = Printer off-line.
4) Green Slow-Flashing, Red Off = Processing Data.
5) Green Off, Red On = Cover Opened, Toner Empty or Developer Unit / Drum unit missing.
6) Green Off, Red Fast-Flashing = Paper Jam or waiting for jam reset.
7) Green Off, Red Slow-Flashing = Paper Empty or Paper tray is not inserted.
8) Green Off, Red Off = Printer power is off.
9) Green Very-Slow-Flashing, Red Off = Printer in sleep mode.
10) Green (any condition above), Red Slow-Flashing = Toner low or paper empty.

So what is your printer condition? Better know what is going on your printer so can solve the problem.

YBC (/\)

Kyocera FS-920... | Answered on Dec 10, 2014


There are actually some certain meaning on the red light and green light showing different information to user. The summaries are:
1) Green On, Red Off = Printer Ready.
2) Green Fast-Flashing, Red Fast-Flashing = Printer warm up.
3) Green Fast-Flashing, Red Off = Printer off-line.
4) Green Slow-Flashing, Red Off = Processing Data.
5) Green Off, Red On = Cover Opened, Toner Empty or Developer Unit / Drum unit missing.
6) Green Off, Red Fast-Flashing = Paper Jam or waiting for jam reset.
7) Green Off, Red Slow-Flashing = Paper Empty or Paper tray is not inserted.
8) Green Off, Red Off = Printer power is off.
9) Green Very-Slow-Flashing, Red Off = Printer in sleep mode.
10) Green (any condition above), Red Slow-Flashing = Toner low or paper empty.

So what is your printer condition? Better know what is going on your printer so can solve the problem.

Kyocera FS-920... | Answered on Dec 10, 2014


Open paper tray, locate the feed roller (small rubbery wheel) and moisten a cloth. Gently clean the roller to remove build up of paper dust from it.

Also worth using is some "anti static foam cleanser" on the cloth to help deep clean the rollers, or the pre-moistened "Screen wipes"

Also check there is nothing blocking hte paper path, remove paper cassette, and toner catridge (and drum if I recall correctly) and see if you can feed a sheet of paper MANUALLY from tray up into the "imaging chamber" where the toner lives. If this feels too stiff, there could be an obstruction in the way, fragment of paper scrunched up after a REAL jam, or fault sensor arm.

If you find something and can remove it, reassemble, and test

Kyocera... | Answered on Dec 10, 2014


laser unit

Kyocera FS... | Answered on Dec 05, 2014


3101: SMTP Authentication error. Consult with Your network
administrator to verify that your Login Account, Name and
Login Paswrod required for SMTP Authentication are correct.

cortezrsv.jpg

Kyocera... | Answered on Dec 05, 2014


Can't be done with out a ,wireless interface card and they usually cost more that the printer ,best thing to do is by power line adapters or at small wireless switch and connect it to that

Kyocera... | Answered on Nov 25, 2014


Broken cleaning lamp wire While the cleaning lamp is on, the broken cleaning lamp wire detection signal is detected for 2 s continuously.

Id look at replacing the drum unit

Kyocera... | Answered on Nov 25, 2014


Are you sure it's 1300 service code as I have the service manual and that code is not listed

Kyocera... | Answered on Nov 25, 2014


check the waste toner bottler or the other toners reset in machine then reboot

Kyocera... | Answered on Nov 25, 2014


check if auto rotation is on or off

Kyocera FS... | Answered on Nov 25, 2014


open the back of the machine two screws hold it in

Kyocera FS... | Answered on Nov 25, 2014


look for the trigger that hits the switch to tell the machine it is close usally i thin long piece of plastic

Kyocera FS... | Answered on Nov 25, 2014

Not finding what you are looking for?

-683 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kyocera Office Equipment & Supplies

  • Forum

View Most Popular

  • Kyocera Office Equipment & Supplies
Loading...