Kyocera FS - Answered Questions & Fixed Issues

If your Lexmark printer is displaying the message "replace toner clean printer," and you have already checked that the toner is full, there might be an issue with the toner cartridge or the printer's sensors. Here are some steps you can take to troubleshoot and potentially resolve the problem:

1. Remove and Reinsert Toner Cartridge: Turn off the printer and open the front cover to access the toner cartridge. Carefully remove the toner cartridge and then reinsert it firmly into the printer. Make sure it is seated correctly in its slot.
2. Check for Obstructions: Inspect the printer's interior for any paper jams, debris, or other obstructions that might be interfering with the toner cartridge or the printer's sensors.
3. Check Toner Sensor: The printer has sensors that detect the toner level. Sometimes, these sensors can become dirty or malfunction. Locate the toner sensor (usually a small window or sensor on the toner cartridge) and ensure it is clean and not obstructed.
4. Reset Printer: Turn off the printer, unplug it from the power source, and wait for a minute or two. Plug the printer back in and turn it on again. This can sometimes clear temporary errors.
5. Check Toner Cartridge Contacts: Ensure that the contacts on the toner cartridge and inside the printer (where the toner cartridge makes contact) are clean and free from dirt or toner residue.
6. Check Printer Settings: Verify that the printer settings are correctly set to recognize the installed toner cartridge. If the printer allows you to manually set the toner cartridge type, make sure it matches the actual cartridge installed.
7. Update Firmware: Check if there are any firmware updates available for your Lexmark printer. Updating the printer's firmware may address known issues and improve printer performance.
8. Try a Different Toner Cartridge: If you have access to another compatible toner cartridge, try using it in the printer to see if the issue is specific to the current cartridge.

there is a black tab in the center where the papers come out that is the tray full sensor arm that is more then likely stuck

Restart the machine

Generally this printer can be separate into 4 major part: Printer body, Toner container, Developer unit and Drum unit. The developer unit is the unit where the toner container "mount" on it and it should be removed to allow cleaning task every time the toner container is replaced.
U may get this error message if the developer unit is not install properly after u replace a new toner container. Just lift the developer unit together with the toner container out of the printer and then insert back properly into the machine.

YBC (/\)

F248 is communication problem ,it some times happens when the printer cannot understand the data coming from the computer from certain program's or a specific file .reset the printer clear any print jobs on the pc and try print a test page if you're still getting that error you will need to get a service engineer to upgrade to the latest firmwarec

I have the same problem. When I get the files I´ll try to update the firmware with a Compact Flash. Instructions in Service Manual.

Where can I find the firmware to kyocera FS-1118MFP?I have the Compact Flash and I need the files. There is files in https://www.kyoceradocumentsolutions.es/es/support/downloads.name-L2VzL2VzL21mcC9GUzExMThNRlA=.html#tab=application but not firmware, only .BIN filesDrivers, fonts and docs in http://www.opendrivers.com/modeldriver/kyocera_fs-1118mfp-driver-download.htmlDrivers in http://www.opendrivers.com/modeldriver/kyocera_fs-1118mfp-driver-download.htmlError code list in https://printcopy.info/?mod=erc&brand=Kyocera&model=FS1118MFPSOLVED. The firmware can be downloaded from https://www.elektroda.pl/rtvforum/topic2733888.html#19175098or in the canal https://t.me/kyoceraFS1118MFP

First you have to upgrade the firmware to the latest. If the error code appears again, then you have to replace the main pwb assy (controller).

You may need an imaging unit. VERY expensive.

After removing paper tray, above the paper tray slot, on the bottom of unit, left side, is a green tab. Pull metal flap down, remove paper, and your in business. That is just my experience with my friends unit.

Drum unit non- installing error

The drum unit is not installed or not installed properly. You must have knocked it loose.Install the drum unit (See page P.1-5-10).

The message you get is from the fuser setting for printing envelope. At the back of the printer, you have a handle wich opens the back dor. There is located the fuser (fixing unit) that will slide back. On left and right of the fuser, you can see 2 green buttons. In your case one of them or both are pressed. If you press one time, the button goes down. If you press again, the buton rise up. Try to press them down.

Once you have installed and setup a multi-tray printer you might like to try to print a document to different printer trays. Open a word document and create a two page document.

• Select your new printer under file->Print (if it's not the default)
• Click the page layout tab
• Click the small triangle at the bottom right
• Open the page setup dialog box and click the page Paper Tab
• Choose a tray for the first page and other pages. Close the dialog box and print.

1087 1087 163 print key

make sure dial on front of cassette matches paper size in cassette

push the drum unit in completely

replace fuser unit

I had the same problem. Pull the Fuser and check Conector.Sometime pieces of paper inside the Conector raises an error.

Please Rate .

i have 7410 error call service. i tried to clean everithing en replaced the tone is almost full- still getting the error message.hat can i do. (fs-3900dn)