Kyocera FS - Answered Questions & Fixed Issues - Page 2

there are many many factory modifications/bulletins for that machine, really the tru fix is very time consuming and if you are paying a dealership to repair, it will cost you more than machines value

no because its a feed source for special paper it wants you to verify what you have loaded

make sure your cassette paper guides are snug to paper or push the system/counter button look under common settings and change the size to letter

You first need a HEPA vac. Toner is considered a carcinogen.

Go to menu.scroll down to device commonscroll rightscroll down to ram diskif it shows off:press ok button now question mark blinkingscroll down to onpress ok buttonpress menu button

Good afternoon, Please can someone tell me what is the error C4600 printer kyocera TASKalfa 2551ci? How can I solve it?

Hi, There is a orange/yellow scanner lock at the back of the machine. You need to pull it towards you to unlock it.

try updating print driver

you have a bad engine or main pcb or connection between them

these machines are notorious for this you have to remove the c developer unit and shake the hell out of it you need a trained tech to do this if you attempt it cover the toner hole and firmly shake the hell out of it if successful it will start to add cyan toner when you reassemble and turn it on it will probably add too much so you will need to keep running prints until it looks good or replace the c developer unit be aware shaking the unit will get toner all over so cover it with a rag good or you will have a big mess

under the front of the cassette on the bottom is a white catch if you pull it towards you the paper will spring up. more then likely it is not automatically getting pushed when you put the cassette in.
if this is not correct if you take the cassette out and look in where you took it out of there should be a arm hanging down just left of center that is the paper out sensor arm of that is broken it could be your problem also

its probably on the developer roller look at it as you spin the roller you should see a darker than normal area wipe the roller with a dry cloth until you no longer see it if you are turning it the right way no toner will come out the roller will have a thin even coating of toner on it or try cleaning the charge roller on top of the drum unit it should be 1 of the 2 these machines need to have the oem toner

old printer not really worth fixing

try a new toner cartridge

I don't think you are looking at coverage I think you are looking at toner levels

load a4 paper in bypass or the mp tray as it is also called

refill...uh oh probably wouldnt try it..there's is like only 1 company that does kyocera refill toners.....call KATUN... you can try to find that on the internet..you most likely willl have to buy actuall kyocera toner..

its a fold down tray on side or in front of machine depends on your model

make sure the main charge cleaner is in home position

Hello, if you remove the pcr assy from the drum unit you will need to put the assy on the table. With a small slotted screwdriver you will have to wedge between the black roller bushes and the gray support on the pinion side. Best regards, Marius