Kyocera Mita Office Equipment & Supplies - Recent Questions, Troubleshooting & Support


reseat orignals on DP.

Kyocera Mita... | Answered on Oct 30, 2019


It just means take all the pages out of the document feeder on top and put the whole complete document in again

Kyocera Mita... | Answered on Oct 30, 2019


Fuser unit Error code, you can try to reset, but if the code still there, you need to change the fuser unit.
This is the way to reset your fuser code;
On the panel press 1087 1087
this will take you to the service mode,(look into the screen)
now on the panel again press 163 and hit the start key.
Look in the screen, you will see execute, select execute by the arrow and hit the start key, the machine will turn off then on. or it will ask you to turn the main power off than on. this might fix your problem, if not! change the fuser.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Kyocera Mita... | Answered on Oct 27, 2019


You have not mentioned the model
This error code means that the dim is at fault or requires re-seating into the machine.

Kyocera Mita... | Answered on Oct 07, 2019


reset error via service mode 163.

Kyocera Mita... | Answered on Sep 06, 2019


problem for km 6030, optimizing performance

Kyocera Mita... | Answered on Jun 06, 2019


Check to make sure that their is no paper that is jammed in the paper draw. Also open the main panel where you would change the toner and pull out the little draw underneath the toner, I believe it is marked A2. Make sure that there is no paper there as well. Another place that paper will sometimes hide is in the left panel by the duplex system. Sometimes a little piece of paper gets left behind and this can cause the system to think there is still paper jammed in the machine. If all else fails try restarting the system. If you are still experiencing a problem than I would recommend you call your servicing dealer.

Hopes this helps.

Henry

Kyocera Mita... | Answered on May 28, 2019


  1. -0007. Add toner. Meaning. An error has occurred in the. machine

Kyocera Mita... | Answered on Apr 17, 2019


remove the flat wire in the scanner, then remove the railings from the scanner, clean the railings with a soft cloth, if you encounter the c3200 error it only means that the railings of the scanner is dirty, the scanner cannot move. i hope this will fix your problem..... if you have anymore questions regarding kyocera copiers dont hesitate to txt me or call me to this number +639081953003 or +639079941995

Kyocera Mita... | Answered on Mar 21, 2019


1087*2 then 251 and press start it will bring some digits then you clear

Kyocera Mita... | Answered on Mar 07, 2019


i've been working on kyocera's for about 4 years. now..this error is not good..it's a general system failure..only solution is replacing main board.
contact me if you need a part #.. I can look it up for you

Kyocera Mita... | Answered on Feb 20, 2019


PRESS 10871087 TWICE THEN TYPE 101 YOU WILL FIND MANY TAPES WITH NUMBERS VALUES YOU MAY INCREASE EACH ABOUT 5 DEGREES .HOPE THATS HELPS.

Kyocera Mita... | Answered on Jan 31, 2019


This is fuser unit error code, you can try to reset it might work, but if the erorr code came back then you need to change the fuser unit.

In order to reset this code: follow those steps
on the panel press 1087 1087
The screen will change to service mode
on the panel again press 163
now look at the screen and you will see Excute.
Select Excute and press the Start key.
The Machine will rebot or it will asks you to turn it off and on.
After the machine load again, it should be good, if the Error came back!! Then change the Fuser Unit.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Kyocera Mita... | Answered on Jan 10, 2019

Not finding what you are looking for?
Kyocera Mita Logo

1,714 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Mita Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1316 Answers

AAAA262430

Level 2 Expert

51 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Kyocera Mita Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...