Lexmark Computers & Internet - Page 8 - Recent Questions, Troubleshooting & Support

To install Lexmark X5630 you need to drivers/ software which you can download from Lexmark Official Support for X5630
Visit the above link, select the Operating System (OS) to get the drivers. After downloading the drivers file, double-click the file to run it and follow the on-screen instruction to install the printer drivers/ software

Let me know if any further clarification/ assistance is required.

Good Luck!
Appreciate generously, if the solution could have been of any help!
CreativeTECH

Try cleaning the nozzle with rubbing alcohol. The nozzle is probably clogged with dried ink.

The User guide has all the information you need to perform thsi action.Setting Password Protect for the menusApply an administrative password to restrict unauthorized users from making changes to the MFP configuration from either the control panel or the Embedded Web Server (EWS).1 Touch the Menus button on the home screen.2 Touch Settings.3 Touch the down arrow and then touch Security.4 Touch the down arrow and then touch Create/Change Passwords --> Create/Change Advanced Password.5 Enter and reenter a password of both alphabetic and non-alphabetic characters. The password must be a minimum of 8 characters.6 Touch Submit.7 Touch Settings --> Security --> Password Protect to view what configuration settings are protected by theAdvanced Password.Note: Settings --> Security --> Password Protect and Settings --> Security --> Create/Change Passwords --> Create Change user Password can be used to restrict access with a different password than the Advanced Password. Use Settings --> Security --> Password Protect to select the menus that are accessible with both an Advanced Password and a User Password.Note: The Advanced Password and the User Password protect the menus on the touch screen control panel of the MFP and the Configuration section of the EWS pages.Restricting Function AccessThe MFP supports a variety of methods for authenticating users prior to allowing access to functions.1 Open a Web browser. In the address line, enter the IP address of the MFP being configured using this format:http://ip_address/.2 Click Configuration.3 Under Other Settings, click Security.d Select an authentication method.e Click Submit.4 Click on the setup link for the authentication method previously selected in step d.a Fill out the appropriate information for the environment.b Click Submit.5 Click Function Access.a Set the function authentication level for each function. Select Off to prevent anyone from using a function.b Click Submit.Preventing access to the menus from the control panelIt is possible to prevent access to all the menus using the control panel touch screen. To prevent access:1 Touch the Menus button on the home screen.2 Touch Settings.3 Touch the down arrow.4 Touch Security --> Function Access --> Menus --> Disabled.5 Touch Submit.

Hi, can you provide a little more detail as what you mean by bottom page cut off?Are you saying that the printer is not printing the last part of the page?

Re-type the wireless password for the printer settings.

Check if there is still ink in the cartridge.

Carrier Jam means that the Carrier which carries the cartridges is not moving correctly in this case please follow the below Steps: Lift the Flat Bed Scanner up so that you can find the Cartridges Inside. Remove the Cartridges from the Printer. Move the Cartridge Carrier Back and Forth as fast as you can! Replace the Cartridges back to the Printer! Good Luck!!!!

Windows - Right click > Remove device.

You must update your drivers for your LexmarkHere is how:Go to StartClick in box and type Device ManagerClick on Device Manager in the listClick on Imaging devicesRIGHT click on printerClick on update driversClick on Search automatically for updated driver software