Lexmark Office Equipment & Supplies - Page 5 - Recent Questions, Troubleshooting & Support

Hey,

The lexmark drivers and software required for installing the printer is available at www.lexmark.com

Select Drivers & downloads then driver finder.

Type in your model x2350 for example

Select your windows version

Download the setup program.

1.Download software
2.Run the downloaded setup
3.Plugin the printer when asked
4.Done

Thanks,
Ekse

Hi,

Go to Lexmark - Click on > Select Your Product and visually scroll through the category and devices or directly enter the product name.

Get more information and help...........

http://printers.iyogi.com/driver-support/windows-7-printer-drivers.html

http://www.makeuseof.com/tag/3-resources-windows-7-printer-drivers-printer-working/

Hope this helps you.

I regret to inform you that the Lexmark Z25 printer is not compatible with Windows 7. The printer is only supported on Windows XP and previous versions. For Mac, it only works on 10.3 and previous versions as well.
Should you need assistance or interested in other Lexmark printers that supports Windows, visit the Lexmark website or contact Lexmark Technical Support Center.

you can get your drivers here:
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0

My Lxmark priter model is 4476-K02 and S.No. is 23385587803 2003/09. I Cant Use It.Because I hav'nt CD to Install It.

Clean the contacts on the cartidge and printer ( open the replace ink door wait for the printhead to come to center and turn off power) if that does not work then replace cartridge, it might be a recycled one that they did not chane the chip. 

This means that the printhead is defective. The printhead is the actual laser scanner unit which is under the top cover. It will need to be replaced.

hello
check this link out
you will get aal the answers for all the printer issue s
http://www.all-laser.com/cgi-bin/webc.cgi/error_lex.html

let me know if you need any assistance

Hello. Unfortunately, if that's the case, there's not much you can do about it but have it serviced. Hope I can assist you more with it.

This error indicates that the Printhead ( Laser Scanner ) is defective. Sometimes turning the printer off for a little & then turning it back on, gets rid of the error but it will usually return. The printhead is situated at the top of the printer under the top cover. It will need to be replaced.

That is not an error message. it is telling you to load the Manual Paper feeder. Put some papaer in it and it will print. check youyr set up to make sure that you are printing to the trays not the manual feeder

After powering up the printer, press Menu, * key, # key (do not hold them, just press and release). You should see a secret menu, the first option being "Serial number". From there, I scrolled down to Network menu -> NVRAM reset to reset the network card. There also seems to be a Utilities menu which allows a full system reset.

The easiest way to solve this is to work through Lexmark Technical Support.

Their web site may have the correct engine code on their site, but installation of the code can be tricky.

Are you getting a 900 Invalid Engine code message?

Don

This sounds like a cartridge problem if you have changed the cartridge and the problem persists I would say it is the positive charge roller inside the printer. If you open the cartridge door and remove the cartridge with the cartridge out starting closing the door and you will see this roller moving down from the top inside of the printer. do not touch this without a glove or lint free cloth. not hard job to change if you can get one in your area if not we have them available.
laserguy@nbnet,nb,ca

There is now default password. The default is without password. Did you try a cold reset?? Push and hold down butons 2,3 and 5 while powering on the machine. Release the buttons when innitialisation is on the display.
Gerrit jan

I had this problem. It was caused by a badly-fitting parallel printer cable. I unplugged the cable at both ends, blew out the dust and re-plugged it. It then worked fine.

If that does not work for you, try cleaning the contacts with electrical contact cleaner. Clean both cable ends, clean the printer socket and clean the PC socket.

Alternatively buy a replacement cable.

Parallel/centronics cables and connectors are far more delicate than USB cables.

To resolve this issue, you will need to update the printer code. Do the following:

1. Check the printer's current base and engine code levels. You can do this by printing the Menu Settings pages from the Utilities Menu:
1. Press the Menu> button on the printer operator panel until Utilities Menu appears on the display.
2. Press the Select button twice to generate the Menu Settings pages.
3. On the second page, look under the Printer Information heading to locate the base and engine code levels.
   
2. Update the printer's base code to at least version 852.054 and the engine code to at least version 9.05-R02:
1. Click here to download the appropriate base and engine codes for your printer model. You will need to contact Lexmark Technical Support to obtain the proper key code for your printer model. IMPORTANT: The code for base printers is different from the code for network printers; please be mindful of this when requesting a key code from Technical Support.
2. Go back to the firmware download page and enter the key code given to you by Technical Support to initiate the downloading of printer code.
   
3. Unzip the downloaded file containing both the base and engine codes to a convenient folder or location. Then follow the instructions for your configuration in the ReadMe file that downloads with the code. You can also find these instructions in the appropriate link below.

OK, a couple of things... Some earlier Lexmark units had code on both a RIP board (raster image
processor) and an engine board. In this case, the code would have to be reloaded into both
boards. Fortunately, this can be done even if the printer will not boot to a ready state. However, if
this has already been done sucessfuly, the problem may well not be the printer but rather something
in the data stream. To confirm this, remove any and all data cables and reboot the printer. If it comes ready and you can print all the internal pages including the network config pages, then it is likely the
problem is the data stream. One must be careful when the printer is controlled by a print server
because the end user may not have control over the print que. If a corrupt or printer incomprehensible
job is stuck in the que, the printer will go to a 900 condition as soon as the network interface
initializes. This will continue until the print que is cleared.

Hope this helps...

Sean.

replace printhead - scanner assembly. The scanner motor is not working correctly. Need to remove side covers, back of printer assembly, the top cover. Printhead is below the top cover

Error 935
Printhead Error - Mirror motor unable to reach operation speed Check cables, look for chafing or damage to ribbon cable at sharp bends around rear cover. Replace printhead or ribbon cable.