LG Studioworks - Popular Questions, Answers, Tips & Manuals

Have you tried another monitor to see if the computer is working?

could you post make and model?

Hey Kuld.. Just asking... since both, your TV and your monitor have the same color issue...??.... have you been to the optometrist lately... (My Dad had this color issue with his eyes!).. he was red color blind.. Good luck,

Bad solder connection on CRT circuit board resolder all bad connectios

There is a component failure on the board inside the display. Since you did not post the model number that is all that I can tell you.

schematic is here: http://www.eserviceinfo.com/downloadsm/10077/LG_7D%20StudioWorks.html

I had a blurry screen last week and too it to IT support. They were able to play around with my software and repair the computer from some of the glitches and viruses that it had. Have you tried getting professional help with your issue? Managed IT Services from InfinIT Consulting

Here's some tricks I would try. Something here, might help... 1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor. 2. Verify the monitor cable is firmly connected to the computer and the monitor. 3. Verify that you have turned the monitor power switch on. 4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works). 5. If the power light on the monitor is not on, try a different power cord. 6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced. 7. Also, you could try your monitor on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers. Good luck.

Remove any speakers or magnets that you might have near the monitor as they can cause visual distortion on your monitor screen.

look listen and dance not matter how you performance keep it calp and trust it

Id try a different monitor to start with. What program are you using when it blanks out?

Make sure that all of your cables are plugged in properly. Sounds stupid but I suggest unplugging every cable you can see, plug them back in firmly and try again. Also make sure that there are no USB's plugged in, or discs in the disc drive as your computer may be attempting to boot from these and failing.

Posibile the flyback is spoilt. It is not worth to fix it since it is aging. Buy a new one.