Maxwest Tablets & eReaders - Page 3 - Popular Questions, Answers, Tips & Manuals
My konka tv android is touchscreen but it won't work. I touch it many times but still didn't work.
There are a few potential reasons why the touchscreen on your Konka TV Android device might not be working properly. Here are a few things you can try to troubleshoot the issue:
- Restart the device: Sometimes, a simple restart can fix issues with the touchscreen. To do this, turn off the device and then turn it back on again.
- Check for updates: Make sure that you have the latest software updates installed on your device. Updating the software can sometimes fix issues with the touchscreen.
- Clean the screen: Dust and dirt can build up on the touchscreen and interfere with its operation. Try cleaning the screen with a soft, dry cloth to remove any debris.
- Check for hardware issues: If the touchscreen still isn't working after trying the above steps, there may be a hardware issue. In this case, you may need to have the device inspected by a technician or bring it to a service center for repair.
If you are still experiencing issues with the touchscreen on your Konka TV Android device after trying these steps, you may want to contact the manufacturer or a qualified technician for further assistance.
12/27/2022 1:46:46 PM •
Tablets &...
•
314 views • 1 helpful votes
How do I Change preferences for my Home location when it is wrong on my tablet?
- Go to the settings app: On most tablets, the settings app can be found in the app drawer or on the home screen.
- Locate the location settings: Look for a section labeled "Location" or "Location & Security". The location settings may be located under the "Device" or "System" section.
- Turn on location services: Make sure that the location services toggle switch is turned on.
- Change the home location: Look for a setting labeled "Home" or "Home Address". Tap on this option to open a map view. Use your finger to move the pin to the correct location.
- Save the changes: Once you have the correct location set, tap on "Save" or "Set as Home".
Note: The steps may vary slightly depending on the specific model and operating system of your tablet. If you are unable to find the location settings, try searching for "location settings" in the device's search bar or help center.
2/7/2023 8:09:45 PM •
Tablets &...
•
53 views • 0 helpful votes
Onn. 7" Tablet, 32GB (2022 Model) TBPRP100071481
- Check with the manufacturer: ONN may offer a selection of cases and screen protectors specifically designed for the 7" Tablet, 32GB (2022 Model). You can check the manufacturer's website or contact their customer support to see if these accessories are available.
- Look for universal cases and screen protectors: There are many cases and screen protectors available that are designed to fit a range of tablets, regardless of the specific model. These universal cases and screen protectors may be a good option if you are unable to find accessories specifically designed for your tablet.
- Check with third-party sellers: There are many third-party sellers who offer cases and screen protectors for a variety of tablet models. You may be able to find a case or screen protector that fits your tablet by searching online marketplaces such as Amazon, eBay, or Etsy.
1/3/2023 10:27:46 PM •
Tablets &...
•
119 views • 0 helpful votes
My Fire HD 8 6th generation is not responding and some of the items on my home screen have disappeared. What can I do to fix this? Maybe it needs a new battery?
There could be several reasons why your Fire HD 8 6th generation is not responding and some items are missing from the home screen. Here are a few things you can try:
- Perform a soft reset: Press and hold the power button for 20 seconds and then release. Wait for the device to restart and see if it resolves the issue.
- Check the battery level: If your device is not charged, it may not function properly. Connect the device to a power source and check if it charges.
- Clear cache and data: Go to Settings > Apps & Games > Manage All Applications > All > Home Screen > Clear Cache and Clear Data.
- Check for updates: Make sure your device is up-to-date with the latest software version. Go to Settings > Device Options > System Updates and check for any available updates.
- Factory reset: If none of the above steps work, you can try a factory reset. Note that this will erase all data on your device, so make sure to back up any important files before proceeding. To perform a factory reset, go to Settings > Device Options > Reset to Factory Defaults.
If none of the above steps work, it is possible that your device may need a new battery or further troubleshooting. You may want to consider contacting Amazon customer support for assistance.
2/25/2023 3:39:37 AM •
Tablets &...
•
33 views • 1 helpful votes
Azpen model G1058B would not charge or turn on
If the charge is depleted and the device is not taking a charge, it won't turn on. No juice, no activation. Why isn't it taking a charge? Several possibilities. 1) The charger might be bad or the cable of the charger defective. Solution: try another charger. 2) The power port on the Azpen may be damaged, such as having a bent pin or a pin broken off. That might require "surgery", i. e. part replacement. Understandably, the cost of repair by a tech could exceed the value of the device. 3) Bad battery. It uses a 7000mAh lithium ion battery. Solution: Battery replacement. 4) Some other component failure. You might have a chat at the following support page.
https://www.azpenpc.com/pages/support
https://www.azpenpc.com/products/azpen-standard-usb-charger
12/17/2022 6:56:56 AM •
Tablets &...
•
178 views • 0 helpful votes
When using my kindle reader and going to the next page all I got was a blank page and have not been able to get anything else. The reader is less than six months old.
If you are experiencing a blank page when trying to read on your Kindle, there are several things you can try to resolve the issue:
- Restart your Kindle: Press and hold the power button for about 20 seconds until the device restarts.
- Check the battery level: Make sure that your Kindle has enough charge to function properly. Connect it to a power source and let it charge for a while.
- Check your internet connection: If your Kindle is connected to the internet, make sure that your Wi-Fi is working properly. Try disconnecting and reconnecting to your Wi-Fi network.
- Check for software updates: Make sure that your Kindle is running on the latest software version. To check for updates, go to "Settings" > "Device Options" > "System Updates".
- Remove and re-download the book: If the problem persists with a particular book, try removing it from your Kindle and re-downloading it.
If none of these steps work, you may need to contact Amazon customer service for further assistance.
2/23/2023 9:47:52 PM •
Tablets &...
•
31 views • 0 helpful votes
Kindle is running slow. How to fix?
If your Kindle is running slow, here are a few things you can try to fix it:
- Restart your Kindle: This is one of the easiest and most effective ways to fix any performance issues. Simply press and hold the power button for 20 seconds until the device turns off, then turn it back on.
- Remove any unnecessary content: If you have too much content on your Kindle, it can slow down the device. Remove any books or files that you don't need.
- Clear cache and data: Clearing the cache and data can help to speed up your Kindle. To do this, go to "Settings" > "Storage" > "Cached Data" and tap on "Clear Cached Data."
- Update the software: Make sure that your Kindle is running the latest software version. To check for updates, go to "Settings" > "Device Options" > "System Updates."
- Disable Wi-Fi and Bluetooth: If you're not using Wi-Fi or Bluetooth, turning them off can help to improve performance.
- Reset your Kindle to factory settings: If none of the above solutions work, you can try resetting your Kindle to factory settings. To do this, go to "Settings" > "Device Options" > "Reset to Factory Defaults."
Keep in mind that some older Kindle models may experience performance issues due to hardware limitations. In that case, upgrading to a newer model might be the best solution.
2/22/2023 3:37:40 AM •
Tablets &...
•
30 views • 0 helpful votes
Tablet turns on with message DEVICE MAPPING TABLE
The message "DEVICE MAPPING TABLE" typically refers to the process of mapping the physical layout of the storage devices in a computer or tablet. This message may appear during the boot process, indicating that the device is loading the map of where data is stored on the storage devices (such as a hard drive or SSD). This message is generally not a cause for concern and the device should continue to boot normally.
1/17/2023 4:13:24 AM •
Tablets &...
•
48 views • 0 helpful votes
How can I cancel passcode on surf onn tablet through parental control
To cancel the passcode on a Surf Onn tablet through the parental control settings, you will need to follow these steps:
- Open the tablet's Settings app.
- Scroll down and tap on the "Parental Controls" option.
- Enter the passcode for the parental controls.
- Tap on the "Set Passcode" option.
- Enter the current passcode and then leave the "New Passcode" and "Confirm New Passcode" fields blank.
- Tap on the "Done" button to remove the passcode.
Keep in mind that the steps for canceling the passcode on a Surf Onn tablet may vary depending on the specific model of the tablet and the version of the operating system that it is running. If you are unable to follow the steps above or if you are having trouble accessing the parental control settings, you may need to refer to the tablet's user manual or contact the manufacturer for assistance.
12/25/2022 1:41:16 AM •
Tablets &...
•
46 views • 0 helpful votes
RCA Delta Pro 2 Won't Read SD Cards
It sounds like the tablet is having trouble reading your 128 GB SD cards.
There are a few things you can try to troubleshoot this issue:
- Check the SD card for any visible damage. If the card is physically damaged, it may not work correctly.
- Make sure that the SD card is properly inserted into the SD card slot on the tablet. It should fit snugly and be fully inserted.
- Check that the SD card is compatible with your tablet. Some tablets can only support SD cards up to a certain capacity or with a certain type of file system.
- If the SD card was working fine before and has suddenly stopped working, it's possible that the card has become corrupt. In this case, you may need to format the card to fix the issue.
- If none of these steps help, you may need to try a different SD card to see if the issue is with the tablet or the SD card.
12/10/2022 9:32:35 AM •
Tablets &...
•
57 views • 0 helpful votes
Not finding what you are looking for?