Maytag Heating & Cooling - Recent Questions, Troubleshooting & Support


Greetings,

I have the same model air conditioner, and had the same symptoms. As you've probably discovered, Fedders is the company that actually built it, and went of business. No one is supporting it any more.

However, you may be in luck. I fixed the problem by simply tipping the unit almost all the way over on its back (leave a little gap) and letting the water drain out of the hose and the filter. After that, it started right up.

Hope that works for you. Stay cool. :)

Maytag Portable... | Answered on Sep 15, 2019


I had the same issue pop up on me on one of these units that was only days old---the folks at maytag told me there were no known issues on these units (recalls, etc) so I figured the blinders were on and stonewall going up. So I got a multimeter, cracked the case on the unit, checked for continuity through the motor windings, and found none. Then pulled the lower squirrel cage apart enough to get the fan off motor shaft, motor out and apart, and found a blown thermal fuse in the motor. $1.69 at Radio Shack and a crimp connector or two and Ahhhhhh, cold air again. Not that hard to do folks! Enjoy.

Maytag Portable... | Answered on Jul 26, 2019


If name tag is legible, check there. Guess 134a

Maytag Heating &... | Answered on Jul 20, 2019


This is a 12,000 btu unit.

Maytag M6Q10F2A... | Answered on Jun 30, 2019


Window AC units need to be leveled horizontally and slightly tilt back for proper drain purposes.

Maytag Heating &... | Answered on Jul 27, 2018


AC units don't need water, only evaporative coolers do.

Maytag Heating &... | Answered on Jul 19, 2018


What make of unit you have. You can get most parts at United refrigeration .fw webb does York, johnston supply does goodman and dcne does Carrier. Also can get replacement parts at grainger

Maytag M6P09S2B... | Answered on Feb 26, 2018


Could the on/off switch be shorted? Could check with a volt/ohm meter, or remove and replace.

Maytag M6Y12F2A... | Answered on Dec 29, 2017


http://static.fixya.com/Manuals/M/Maytag/_9D7050BA1B1B7A144E846785403A9D73.pdf
I couldn't find the instal instructions , but this info should help with the sizing.

Maytag M6Q10F2A... | Answered on Dec 27, 2017


Is the unit tipped backward toward the outside of the structure? Also, check the drain holes in the drip pan to be sure they are not clogged. The holes will be under the outside part of the unit.

Maytag M6Q10F2A... | Answered on Dec 13, 2017


sounds like the contactor is welded closed. make and model helps but with limited experience you may want professional help. Best Wishes!!

If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

Maytag M7Y10F2A... | Answered on Nov 25, 2017

Not finding what you are looking for?
Maytag Logo

910 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Heating & Cooling Experts

Cindy Wells

Level 3 Expert

6048 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Maytag Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...