Maytag Logo

Maytag Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 2K Products
  • 163K Answers
  • 3M Views

It happened to mine also. Nothing came out of a pocket, either. A scarf worked it's way in somehow and got caught up in the gear that moves the agitator. Lift off the center cap, loosen and remove the 11mm bolt, then lift the agitator straight up... If you don't lift straight up from the middle it will seem like something else is holding it.

Maytag Washing... | Answered on Nov 16, 2019


ask google to see if they find it

Maytag... | Answered on Nov 11, 2019


https://www.youtube.com/watch?v=xpTCLMugh60
https://producthelp.maytag.com/Laundry/Washers/Washer_Product_Assistance/Error_Codes_in_Front_Load_Washers

From the Maytag site: To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

Maytag Washing... | Answered on Nov 03, 2019


sounds like the ribbon cable that connects the mechanism set to the rear control board has become unplugged. I have a troubleshooting guide. email me at garymyers@insight.rr.com.

Maytag SkyBox... | Answered on Nov 03, 2019


My range showed a code of 5A6, I held the clock key down for a few seconds and it corrected itself.

Maytag MER5775Q... | Answered on Nov 03, 2019


i don't know. sounds like a fault in the program. consider unplugging machine for 10 mintes. plug it back in and run a short wash to see if the program has reset itself. if not OK, call for repair estimate then decide if you can live with it as is,-- have someone try to repairit -- or replace it with a new one which may offer extended warranty for $$.

Maytag... | Answered on Nov 03, 2019


I don't know what it means but you can try to reset the control panel by unplugging it for 10 minutes then plugging it back in. This may or may not help but it works every time my dryer gets stuck on or off with the panel display showing something odd, or stuck on so many minutes left but it doesn't ever stop. It won't cost you anything to try this. If it happens very often you may need the panel replaced.

Maytag Dryers | Answered on Oct 27, 2019


There's a PDF with the diagnostics codes here:

http://www.uncleharrywizard.com/nephewclub/wizardwasher/whirlpool-kitchen-aid/vertical-modular-washer-vmw/WTW-MVW%20Washer%20-%20diagnostic%20mode.pdf

Or reach out to these folks to see if the repair manual includes the schematics:

Maytag Washing... | Answered on Oct 21, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Maytag Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18127 Answers

Cindy Wells

Level 3 Expert

6049 Answers

Are you a Maytag Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...