MFI2269VEM1 Maytag Refrigerator
If you suspect that your fridge control panel has stopped working, the first thing to try is resetting it. To do this, simply press and hold the power button for several seconds until all of the indicator lights turn on.
12/30/2022 6:11:10 PM •
Maytag...
•
Answered
on Dec 30, 2022
Our mdg75pnhvw28 is giving a "rotation fault" after having changed the lower belt. Can't find a service manual to troubleshoot. Any suggestions?
I'm sorry, but I'm unable to provide specific troubleshooting advice for your mdg75pnhvw28 without more information about the device and the context in which the "rotation fault" is occurring.
Without a service manual or additional information about the device and its components, it's difficult for me to identify the root cause of the issue or suggest potential solutions.
In general, when troubleshooting a device that is experiencing a problem, it can be helpful to gather as much information as possible about the device and the circumstances surrounding the issue. This can include the make and model of the device, any error messages or codes that are displayed, and any recent changes or events that may have preceded the problem.
If you have access to a service manual or other technical documentation for the device, that can be a valuable resource for identifying potential causes and solutions for the problem. If you do not have access to a service manual, you may be able to find one online or by contacting the manufacturer or a qualified repair technician.
I recommend seeking the assistance of a qualified repair technician or the manufacturer if you are unable to identify the cause of the problem and do not have access to a service manual. A repair technician will have the necessary knowledge, tools, and experience to diagnose and repair the issue with your device.
12/27/2022 10:18:17 PM •
Maytag Dryers
•
Answered
on Dec 27, 2022
The orange full light is
This problem is usually caused by an improperly installed water collection bucket or the float valve inside the top of the bucket is broken or stuck in the DOWN position.
To troubleshoot this, turn the unit OFF & unplug it. Remove he bucket, check the float valve's position. If it stuck in the UP position, jiggle the handle to make it return to the DOWN position. This will also allow you to determine if the float is broken. If all this checks out, reinstall the bucket "squarely" from top to bottom into the bucket holder. It must make contact with the bucket safety removal switch on the back wall of the holder. When installed properly, the bottom of the bucket will not tilt down at all. Plug the unit in and turn it ON. If everything was done correctly, the unit should start within a few seconds.
Hope this helps you to troubleshoot and solve the problem. Thnanks for choosing FixYa.
How to get clothes out of a locked washing machine
Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer for one (1) minute to ensure the error code does not display again.
Best to you
Maytag Control Locked error model # MFW9700SQ1
Holding the Cycle End Signal button for 3 seconds is the way to turn the control lock off and on with this model. If that is not unlocking the control like it should, the first thing you would want to try is unplugging it for 5 minutes to let the controls reset.
Best to you
What does the F30 code
The F30 error code indicates an issue/error with the Dispenser System. It occurs when the dispenser motor cannot be driven to its proper position.
12/5/2022 2:49:38 AM •
Maytag...
•
Answered
on Dec 05, 2022
Maytag 2000 series shows error code f6 e1. How can I fix?
Before spending much time and possible unnecessary work, the E1-F6 code may be nothing more than your bottom cover plate is not in place or missing. Recently was servicing a Maytag 2000 series wash and during the inspecting of the cycles it quit and flashed those codes. I had been testing it WITHOUT the bottom cover plate on. When I went to install it back on the code disappeared. Problem simply solved.
Maytag Maxima washer error codes E01 F08
Mine was resolved after changing the Symmons slide valve at the inlet to the hoses. This valve is spring loaded and does not work if not exercised as open and close on regular basis. My hot water supply was completely shut off and cold water remained open at all time. Check the incoming water pressure by unscrewing the hoses from washer and check water outlet by filling the bucket from both sources. Symmons slide valve at the wall is W-400 and was 25 years old.
Not finding what you are looking for?